Cisco WS-C4006-S3-RF Catalyst Managed Modular Switch

CISCO Part #/MPN: WS-C4006-S3-RF

DiscTech Item #: CIS-WS-C4006-S3-RF-FR-3M


$9,995.00
  • Special Order - Ships in 5-10 business days
    Special Order - Ships in 5-10 business days

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.

$9,995.00

Interface Types: Fiber Optic - SC/PC, Fiber Optic - LC/PC, Ethernet RJ45, SFP, GBIC

Electrical Interface: Ethernet Gigabit - 1Gbps

Bays/Ports/Slots: 3

U Height: 10U

Voltage: 110-240V Multi

Cisco 4006 Catalyst Managed Modular Switch WS-C4006-S3-RF - Factory Refurbished

Fully eligible for a Cisco SmartNet contract. Fully licensed.


Cisco WS-C4006-S3-RF Catalyst Managed Modular Switch - Factory Refurbished

The Cisco Catalyst® 4000 Series of modular switches include the Cisco Catalyst 4003 and Catalyst 4006 chassis. As a key component of Cisco AVVID (Architecture for Voice, Video, and Integrated Data), the Cisco Catalyst 4000 Series extends control from the backbone to the network edge with intelligent network services including advanced quality of service (QoS), scalable performance, comprehensive security, and simple manageability. The modular architecture, media flexibility, and expandability of the Cisco Catalyst 4000 Series enable a longer deployment life in converged networks. A longer deployment life reduces the overall cost of ownership by minimizing recurring operational expenses and also improves return on investment (ROI).

Cisco Catalyst 4000 Series switches are also ideal for business services aggregation and subscriber access in metropolitan-area networks (MANs) that use optical Ethernet in the First Mile.

Cisco Catalyst 4000 Series Enhances Control of Voice, Video, and Data Traffic for Converged Networks The Cisco® Catalyst® 4000 Series integrates nonblocking Layers 2-4 switching with enhanced control, enabling business agility for enterprise and metropolitan Ethernet customers deploying Internet-based applications (Figure 1). As a component of Cisco AVVID (Architecture for Voice, Video and Integrated Data), the Cisco Catalyst 4000 Series extends control from the backbone to the network edge with intelligent network services, including advanced quality of service (QoS), scalable performance, comprehensive security, and simple manageability. The modular architecture, media flexibility, and expandability of the Cisco Catalyst 4000 Series enable a longer deployment life in converged networks, which reduces the overall cost of ownership by minimizing recurring operational expenses and improves return on investment (ROI). Cisco Catalyst 4006 Series Switch The Cisco Catalyst 4000 Series, now with two chassis alternatives and five supervisor engine alternatives, provides a common architecture that scales to 240 ports of 10/100 or 100BASE-FX Fast Ethernet, or 240 ports of 1000BASE-LX or 10/100/1000BASE-T Gigabit Ethernet. The Cisco Catalyst 4006 switch enhances the Cisco commitment to affordable enterprise and branch scalability, providing a cost-effective, flexible network solution that scales to meet today's high-performance needs with investment protection. Configuration Alternatives The Cisco Catalyst 4000 Series with Supervisor Engine II-Plus, III, and IV; 10/100/1000 autosensing Fast Ethernet/Gigabit Ethernet; and 100-Mbps Fast Ethernet fiber line cards now offers an even more powerful and flexible network solution. This enables specific network configurations to be mixed and matched to meet the specific needs of any campus network (Table 1). Table 1 Cisco Catalyst 4000 Series Port Densities Cisco Catalyst 4000 Series Switching Modules Number of Interfaces Supported per Line Card Cisco Catalyst 4003 with Supervisor Engine I Cisco Catalyst 4006 with Supervisor Engines II, II-Plus, III, or IV Switched 10/100 Fast Ethernet (RJ-45) 32 or 48 96 240 Switched 10/100 Fast Ethernet (RJ-21) 48 96 240 Switched 100 Fast Ethernet (MT-RJ) 4, 24, or 48 96 240 Switched 1000 Gigabit Ethernet (fiber) 2, 6, 18, or 48 96 240 Switched 1000BASE-T Gigabit Ethernet 12, 24, or 48 96 240 Cisco Catalyst 4000 Series solutions now can be built with five powerful supervisor engine alternatives. Each provides a high-performance, centralized, shared-memory switch fabric, while protecting your line card investment by supporting the addition of optional higher-layer function engines (Table 2). Table 2 Cisco Catalyst 4000 Series Supervisor Engine Features Feature Cisco Catalyst 4003 Supervisor Engine I Cisco Catalyst 4006 Supervisor Engine II Cisco Catalyst 4006 with Supervisor Engines II-Plus, III, and IV Cisco Catalyst 4003 chassis support Yes No No Cisco Catalyst 4006 chassis support No Yes Yes Table 3 Cisco Catalyst 4000 Series SupervisorEngine Features Feature Cisco Catalyst 4003 Supervisor Engine I Cisco Catalyst 4006 Supervisor Engine II Cisco Catalyst 4006 with Supervisor Engines III and IV Switching fabric 1 24-Gbps switching engine 3 24-Gbps switching engines 1 64-Gbps switching engine Switching throughput 18 Mbps (Layer 2) 18 Mpps (Layer 3) 48 Mpps (Layer 2/3/4) Cisco Express Forwarding Multilayer switching Layer 2 Layer 2 Integrated Layer 2/3/4 Dual Gigabit Ethernet uplinks No Yes Yes Operating system Cisco CatOS Cisco CatOS Cisco IOS® Software Maximum number of Media Access Control (MAC) addresses dynamically allocated between active ports 16,384 16,384 32,768 QoS System-based •Classification •Scheduling System-based •Classification •Scheduling Port-based •Classification •Scheduling •Marking (class and type of service [CoS and ToS]) •Dynamic Buffer Limiting (Congestion Avoidance) (Supervisor IV only) Bandwidth management None None •Policing (1024 ingress and egress policies) •Shaping and sharing Access control lists (ACLs) Supported in hardware with Layer 3 services engine (IP only) Supported in hardware with Layer 3 services engine (IP only) Supported in hardware based on IP and MAC address Queues 2 2 4 Multicast •Hardware-based Protocol Independent Multicast (PIM) •Cisco Group Management Protocol (GMP) client •Hardware-based PIM •Cisco GMP client •Hardware-based PIM •Cisco GMP server •Internet Group Management Protocol (IGMP) v1, v2, v3 •IGMP snooping •Distance Vector Multicast Routing Protocol (DVMRP) •Source-Specific Multicast (SSM) Removable compact flash No No Yes Hardware support for 4096 virtual LAN (VLAN) numbering Yes Yes Yes Environmental status of switch Yes Yes Yes Table 4 Cisco Catalyst 4000 Series Supervisor Engine Features Feature Cisco Catalyst 4003 Supervisor Engine I Cisco Catalyst 4006 Supervisor Engine II Cisco Catalyst 4006 with Supervisor Engines II-Plus, III and IV Simple Network Management Protocol Yes Yes Yes NetFlow Services Card (Option) No No Yes (Supervisor IV) Remote Monitoring (RMON) Yes Yes Yes Per-VLAN Spanning Tree (PVST) Yes Yes Yes Console/Telnet Interface Yes Yes Yes Out-of-band management (RJ-45) 10 Mbps 10/100 Mbps 10/100 Mbps Cisco Fast EtherChannel® and Gigabit EtherChannel technology across line cards Yes Yes Yes Fabric Store and forward Store and forward Store and forward Architecture Modular/shared memory Modular/shared memory Modular/shared memory Note: For a more detailed list of Cisco Catalyst 4006 Supervisor Engine III and the Cisco Catalyst 4500 Series Supervisor Engine II-Plus and IV features, refer to the Cisco Catalyst 4000 and 4500 Supervisor Engine data sheets at: http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheets_list.html Cisco Catalyst 4000 Series solutions can be built with two powerful chassis alternatives. Each provides enterprise-class functions (Table 5) with cost-effective pricing. Table 5 Cisco Catalyst 4000 Series Chassis Features Feature Cisco Catalyst 4003 Chassis Cisco Catalyst 4006 Chassis Total number of slots 3 6 Supervisor Engine supported Supervisor Engine I Supervisor Engine II, II-Plus, III, or IV Number of hot-swappable switching module slots 2 5 Switching modules supported All (except WS-X4019) All Number of power-support bays 2 3 AC input power Yes Yes DC input power Yes Yes Integrated inline DC power No Yes External inline power IP phone support Yes Yes Minimum power supplies 1 2 Number of fan-tray bays 1 1 WAN Integration Yes Yes Rack mount Center, front Center, front The industry-proven Cisco IOS Software network service strategy spans years of customer-suggested evolution to meet the most demanding network needs. Networks benefit from the breadth and depth of these network services and mature protocols. Configuration Flexibility and Modular Superiority Cisco Catalyst 4003 and 4006 switches offer a comprehensive, scalable suite of 10/100/1000-Mbps Ethernet switch modules that deliver hot-swappable, "plug-and-play" enterprise intelligence today, while providing easy growth and flexible protection to keep pace with the increasing network demands of tomorrow. Several Cisco Catalyst 4000 Series modules are available, which can be mixed and matched to suit numerous wiring-closet, data-center, or branch-office deployments. All Gigabit Ethernet ports can be 1000BASE-SX, 1000BASE-LX/LH, or 1000BASE-ZX by using flexible, hot-swappable gigabit interface converter (GBIC) modules. The Cisco Catalyst 4000 Series supports the following switching modules: •48-port 10/100/1000-Mbps Gigabit Ethernet (RJ-45)—WS-X4548-GB-RJ45 (power-efficient) and WS-X4448-GB-RJ45—This module, with multispeed autosensing, autonegotiating technology, provides wiring-closet investment protection by allowing Fast Ethernet desktops to migrate to Gigabit Ethernet in the future, without replacing the switch line cards. All 48 ports can be used at 10 Mbps, 100 Mbps, or 1000 Mbps up to 100 meters over Category 5 copper cabling. The 48 ports can burst to Gigabit Ethernet line rate and can share 12 Gbps of full-duplex bandwidth into the switching fabric. The amount of oversubscription can be controlled simply by varying the number of ports used at 1000 Mbps. All ports use the standard IEEE 802.3x flow-control (pause frame) mechanism to control Gigabit Ethernet host traffic. •48-port 10/100-Mbps Ethernet (RJ-45)—WS-X4148-RJ—This module provides 48 ports of dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching. All ports can use Cisco Fast EtherChannel® technology for higher-speed uplinks or server connections. •48-port 10/100-Mbps Ethernet with inline power (RJ-45)—WS-X4148-RJ45V—The inline power 10/100BASE-T Ethernet switching module supports up to 48 ports per module (RJ-45 interfaces). Along with phone discovery, these modules support autosensing and autonegotiation to determine the speed and duplex mode of the attached device. The Cisco Catalyst 4003 uses the Cisco Catalyst Inline Power Patch Panel to provide inline power. The Cisco Catalyst 4006, with support for up to 240 multiservice ports, directly provides inline power. To support the new demand for phone power and WLANs, Cisco has developed a new auxiliary DC power shelf that supplies the Cisco Catalyst 4006 with the 48 volts needed for inline power. •48-port 100-Mbps Ethernet (RJ-21 telco)—WS-X4148-RJ21—This module provides 48 ports of dedicated 100 Ethernet switching for Fast Ethernet client or server switching. All ports can use Cisco Fast EtherChannel technology for higher-speed uplinks or server connections. •Layer 3 Services Engine—32-port 10/100-Mbps Ethernet plus 2-port Gigabit Ethernet uplinks—WS-X4232-L3—This module gives access to Layer 3 services to all Cisco Catalyst 4000 Series supervisor engines, delivering Layer 3 routing to the entire chassis. In addition, this module provides 32 ports of dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching, along with 2 dedicated Gigabit Ethernet connections for Cisco Gigabit EtherChannel connection to a high-speed core or Gigabit Ethernet server connections. All 10/100 ports can use Cisco Fast EtherChannel technology for higher-speed uplinks or server connections. •Access Gateway Module—WS-X4604-GWY—The Cisco Catalyst 4500 Access Gateway Module (AGM) integrates Cisco IOS Software routing and Cisco CallManager voice services into Cisco Catalyst 4000 Series switches. Combining the LAN and WAN infrastructure enables businesses to reduce network complexity, improve network deployment times, and prepare for voice, video, and data convergence. •48-port 100-Mbps Ethernet 100BASE-LX10 (MT-RJ)—WS-X4148-FX-MT—The 48-port 100BASE-LX10 Fast Ethernet line card for single-mode fiber provides high-density connectivity for both residential and small business customers over distances up to 10 km. Fast Ethernet over single-mode fiber offers an attractive choice of cost and future performance; the same access fiber infrastructure can be Gigabit-enabled by upgrading the switching equipment. •24-port 100-Mbps Ethernet 100BASE-FX (MT-RJ)—WS-X4124-FX-MT—This module provides 24 ports of dedicated 100 Fast Ethernet client or server switching. All ports can use Cisco Fast EtherChannel technology for higher-speed uplinks or server connections. •48-port 100-Mbps Ethernet 100BASE-FX (MT-RJ)—WS-X4148-FX-MT—The 48-port line card (single-slot) is based on the same architecture as the 24-port 100BASE-FX line card with MT-RJ connectors. Both line cards offer the security and resiliency features of fiber-optic cable plants, optimizing them for networks with concerns for distance limitations, intrusion, or radio frequency interference. Government agencies or enterprise customers that process confidential information or offer e-commerce are optimal candidates for these line cards. •32-port 10/100-Mbps Ethernet plus 2-port Gigabit Ethernet uplinks—WS-X4232-GB-RJ—This module provides 32 ports of dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching, along with 2 dedicated Gigabit Ethernet connections for Cisco Gigabit EtherChannel connection to a high-speed core or Gigabit Ethernet server connections. All 10/100 ports can use Cisco Fast EtherChannel technology for higher-speed uplinks or server connections. •32-port 10/100-Mbps Ethernet BASE plus modular uplink support—WS-X4232-RJ-XX—This module provides 32 ports of dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching. Optional uplink daughter cards provide 4-port 100BASE-FX multimode fiber connections when attached to the 32-port 10/100BASE card. All ports can use a Cisco EtherChannel connection to connect to a high-speed core or Gigabit Ethernet server. All 10/100 ports can use Cisco Fast EtherChannel technology for higher-speed uplinks or server connections. •4-port 100-Mbps Fast Ethernet uplink module—WS-U4504-FX-MT—This daughter-card option provides 4 ports of dedicated 100 Fast Ethernet (multimode) switching for client or server switching (requires the 32-port 10/100-Mbps Ethernet BASE card). •2-port Gigabit Ethernet (GBIC slot)—WS-X4302-GB—This module provides two ports of dedicated 1000BASE-X Gigabit Ethernet uplinks for high-speed backbone switch-to-switch applications or smaller server-farm applications. It uses versatile GBIC technology, allowing intrabuilding multimode connections to be intermixed with long-distance campus single-mode connections. All ports can use Cisco Gigabit EtherChannel technology for high-speed interconnection applications. •6-port Gigabit Ethernet (GBIC slot)—WS-X4306-GB—This module provides six ports of dedicated 1000BASE-X Gigabit Ethernet uplinks for high-speed backbone switch-to-switch applications or smaller server-farm applications. It uses versatile GBIC technology, allowing intrabuilding multimode connections to be intermixed with long-distance campus single-mode connections. All ports can use Cisco Gigabit EtherChannel technology for high-speed interconnection applications. •18-port Gigabit Ethernet (GBIC slot)—WS-X4418-GB—This module is targeted specifically at building cost-effective 1000BASE-X Gigabit Ethernet server farms, rather than backbone switch-to-switch applications. It provides 2 dedicated Gigabit Ethernet uplinks, and up to 16 ports per module for high-performance Gigabit Ethernet server connectivity. The 16 server ports can burst to Gigabit Ethernet line rate and share 8 Gbps of full-duplex bandwidth into the switching fabric. Because all ports use GBICs, the amount of oversubscription can be controlled simply by varying the number of GBICs used. The server ports use the standard IEEE 802.3x flow-control (pause frame) mechanism to control Gigabit Ethernet host traffic. •48-port 1000BASE-LX Gigabit Ethernet module (small form-factor pluggable [SFP])—WS-X4448-GB-LX— This module is targeted specifically at Ethernet in the First Mile (EFM) opportunities. It can provide up to 240 ports of IEEE 802.3z 1000BASE-LX per Cisco Catalyst 4000 Series switch, allowing service providers to run point-to-point Gigabit Ethernet fiber links over single-mode fiber within the access/distribution layer of the network. The module includes 48 1000BASE-LX SFP optics preloaded at the factory. •24-port 10/100/1000BASE-T module (RJ-45)—WS-X4424-GB-RJ45—This module, with multispeed autosensing, autonegotiating technology, provides wiring-closet and server-farm investment protection by allowing Fast Ethernet desktops and servers to migrate to Gigabit Ethernet in the future without replacing the switch line cards. All 24 ports can be used at 10 Mbps, 100 Mbps, or 1000 Mbps up to 100 meters over Category 5 copper cabling. The 24 ports can burst to Gigabit Ethernet line rate and share 12 Gbps of full-duplex bandwidth into the switching fabric. The amount of oversubscription can be controlled simply by varying the number of ports used at 1000 Mbps. All ports use the standard IEEE 802.3x flow-control (pause frame) mechanism to control Gigabit Ethernet host traffic.
Click here to view the manufacturer's item description/brochure

Weight: 80 lb

Warranty: 1 Year DiscTech

Factory Refurbished

Condition Levels Explained

The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty