Dell N98MP 4 Port SAS Controller for Powervault MD3200 MD3220 storage arrays

Dell Part #/MPN: N98MP

DiscTech Item #: DEL-N98MP-NP-OE

$1,395.00
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • In Stock:2Need more?
    Stock Levels

    This stock level is real time and accurate. This quantity is available for same-day shipment. Larger quantities can take up to a week to ship. Call us for larger quantities that you need urgently.

Back
$1,395.00

Interface Types: SAS Serial Attached SCSI

Electrical Interface: SAS-2 Serial Attached SCSI v2 - 6.0Gbps

On-Board Cache: 2GB

Dell N98MP 6Gb/s 4 Port SAS EMM RAID Controller for Powervault MD3200 and MD3220 storage arrays - New Pull

Dell N98MP 6Gb/s 4 Port SAS EMM RAID Controller for Powervault MD3200 and MD3220 storage arrays - New Pull

Alternative Part Numbers: 0N98MP C256J 0C256J

Compatibility: Dell Powervault MD3200 and MD3220

Dell N98MP 6Gb/s 4 Port SAS EMM RAID Controller for Powervault MD3200 and MD3220 storage arrays - New Pull

The Dell MD3200i and MD3220i storage enclosure contains two controller modules. Both are hot-pluggable and can be removed and installed independently without shutting down the enclosure.

This is a Dell original controller module with x1 SAS OUT SFF-8088, x1 Ethernet MGMT Port, and 4x SAS IN ports SFF-8088.

Supports Dell original SAS/SATA hard drives.

Alternate MPNs: 0N98MP C256J 0C256J

Weight: 6 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty