Fujitsu MAT SCSI Hard Drive MAT3147NC

(0) No Reviews Yet

FUJITSU Part #/MPN: MAT3147NC

DiscTech Item #: FUJ-MAT3147NC-FR-OE


$145.00
$145.00

Enterprise Grade

Capacity: 146GB

Speed: 10,000RPM

Interface Types: SCSI 80pin SCA-2 Hot-Swap

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Sustained Throughput: 132

Average Seek Time: 4.5 / 5.0

Electrical Interface: SCSI LVD U320 - 320MBps 16-bit

On-Board Cache: 8MB

Fujitsu MAT 147GB 10K U320 80pin SCA-2 SCSI Hard Drive MAT3147NC - Factory Refurbished

With Fujitsu's innovative 4-platter hard disk drives, you can dramatically increase speed and efficiency, because fewer platters mean higher data rates.

Fujitsu's enterprise hard disk drives are also the industry's first 75Gb/square inch design to deliver 300GB of storage capacity in a 10K RPM 3.5-inch form factor. This makes them a perfect solution for today's demanding storage environments. Fujitsu's hard disk product variations and accelerated performance allow greater flexibility for system builders or VARs building rack-optimized or tower servers, disk systems, and RAID.

But these enterprise hard disk drives not only provide robust capacity - they're also powerful. Fujitsu has substantially increased the maximum internal data transfer rate on this series, reflecting a 22% improvement over the previous generation of drives. Additionally, these enterprise hard disk drives are equipped with 68Pin or 80Pin U320 SCSI interfaces and 2Gbps Fibre Channel.

ModelMAT3073

NC/NP/FC
MAT3147

NC/NP/FC
MAT3300

NC/NP/FC
Functional Specifications
Storage Capacity (formatted)73.5 GB147.0 GB300.0 GB
Disks134
Heads (read/write)258
Bytes/Sector512
Seek TimeTrack to trackRead: 0.2 ms (typ) / Write: 0.4 ms (typ)
AverageRead: 4.5 ms (typ) / Write: 5.0 ms (typ)
Full trackRead: 10.0 ms (typ) / Write: 11.0 ms (typ)
Average Latency2.99 ms
Rotational Speed10,025 RPM
Areal Density75 Gbits/sq. in. (max.)
Data Transfer RateTo/from media132 MB/s (max.)
To/from hostSCSI: 320 MB/s, FC: 2 Gb/s
Recording Code32/34 MEEPRML
InterfaceSCA-2 (NC Series), 68Pin Wide (NP Series), FC-AL
Head Positioning MethodRotary VCM
Start Time30 s (typ)
Stop Time30 s (typ)
Buffer Size8 MB
Physical Specifications
Power RequirementsVoltage5 V ± 5%, 12 V ± 5%
Spin-up12V ± 5% @ 2.5A (peak)

3.0 A (peak < 100 us)

5V ± 5% @ 0.7A
Idle (typ.)SCSI9.5 W
FC10.5 W
Dimensions (HxWxD)25.4mm x 101.6mm x 146.0mm
Weight750g
Ambient TemperatureOperating5°C to 55°C (DE base 60°C max)
Non-operating-40°C to 70°C
Gradient15°C/H max
Relative HumidityOperating5% to 95% (non-condensing)
Non-operating5% to 95% (non-condensing)
Max. wet bulb29°C (operating)
VibrationOperating0.6 mm (5 to 20 Hz) / 1.0 G (20 to 300 Hz)
Non-operating3.1 mm (5 to 20 Hz) / 5.0 G (20 to 300 Hz)
ShockOperating65 G max. (2 ms)
Non-operating225 G max. (2 ms)
Altitude (operation)Operating3,048 m (max.)
Non-operating12,192 m (max.)
Acoustics Noise (idle sound power) (typ.)3.4 bels (ready)
Reliability Specifications
MTBF1,200,000 hours
Error RatesSeek errors10 per 108 seeks
Unrecoverable errors1 per 1015 bits read

Click here to view the manufacturer's item description/brochure

Weight: 1.8 lb

Warranty: 1 Year DiscTech

Factory Refurbished

Condition Levels Explained

The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty

Ratings & Reviews

No reviews available

Be the first to Write a Review