SAMSUNG Part #/MPN: HD103UJ
DiscTech Item #: SAM-HD103UJ-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 1TB
Speed: 7,200RPM
Interface Types: SATA
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 42 - 85
Average Seek Time: 8.2
Electrical Interface: SATA 300 - 3.0Gbps
On-Board Cache: 32MB
Samsung Spinpoint F1 HD103UJ 1TB 7.2K 3.5" SATA Hard Drive - New Pull
- • Formatted capacity : 1 TB
• Serial ATA 3.0Gbps Interface Support
• Improved recording stability over temperature with PMR
• Advanced dynamic FOD control for best data integrity
• Intelligent compensation of external disturbance
• SATA Native Command Queuing Feature
• Device Initiated SATA Power Management
• Staggerd Spin-up Support
• Environment friendly product with RoHS compliance
• Improved performance with dual-ARM based firmware
• ATA S.M.A.R.T. Compliant
• ATA Automatic Acoustic Management Feature
• ATA 48-bit Address Feature
• ATA Device Configuration Overlay Feature
• NoiseGuard™
• SilentSeek™
Alt P/N: HD103UJ/D
Compatibility:
This drive is compatible with any system that uses SATA hard drives.
Drive specification | HD103UJ |
Formatted Gbytes (512 bytes/sector) | 1000 |
Bytes per sector | 512 |
Read/write heads | 10 |
Data Disks | 5 |
Areal density (Gbits/inch2 avg) | 148 |
Spindle speed (RPM) | 7,200 |
Internal data transfer rate (Mbits/sec max) | 1070 |
I/O data transfer rate (Mbytes/sec max) | 300 |
Cache buffer | 32 Mbytes |
Height (max) | 26.11 mm (1.028 inches) |
Width (max) | 101.85 mm (4.010 inches) |
Length (max) | 146.99 mm (5.787 inches) |
Weight (max) grams | 700 |
Average seek, read (msec typical) | 8.2 |
Startup current (typical) 12V (peak) | 2.0 amps |
Idle mode (typical) watts | 9.0 |
Ambient temperature | 5° to 60°C (op.) –40° to 70°C (no-nop.) |
Click here to view the manufacturer's item description/brochure
Alternate MPNs: HD103UJ/D
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty