Seagate Part #/MPN: ST3250824A
DiscTech Item #: SGT-ST3250824A-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 250GB
Speed: 7,200RPM
Interface Types: IDE ATA 3.5in
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Average Seek Time: 4.16
Electrical Interface: EIDE Ultra ATA100 100MBps
On-Board Cache: 8MB
Seagate Barracuda ST3250824A 7200.9 250GB 7.2K IDE ATA/100 Hard Drive - New Pull
• 7,200-RPM spindle speed
• 8-Mbyte buffer on: ST3400832A, ST3300831A, ST3250823A, ST3250824A and ST3200826A.
• 16-Mbyte buffer on: ST3400632A, ST3300631A, and ST3250623A
• High instantaneous (burst) data transfer rates (up to 100 MB per second) using Ultra DMA mode 5.
• Tunneling Giant magneto-resistive (TGMR) recording heads and EPRML technology, which provide the
drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Full-track multiple-sector transfer capability without local processor intervention.
• Quiet operation.
• 300 Gs nonoperating shock.
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Support for Read Multiple and Write Multiple commands.
• Support for autodetection of master/slave drives that use cable select (CSEL).
Specifications | 250 GB |
---|---|
Model Number | ST3250823A |
Interface | EIDE ATA/100(PATA) |
Cache | 8 MBytes |
Capacity | 250 GB |
Guaranteed Sectors | 488,397,168 |
Number of pins on the I/O connector | 40 |
PHYSICAL | |
Height (max) | 26.11 mm (1.028 inches) |
Width (max) | 101.85 mm (4.010 inches) |
Length (max) | 146.99 mm (5.787 inches) |
Weight (typical) | 635 grams (1.39 pounds) |
COMPLIANCE | |
European Union Restriction of Hazardous Substances | Y |
PERFORMANCE | |
Spindle Speed | 7200 rpm |
Average latency | 4.16 msec |
Random read seek time | <11.0 msec |
Random write seek time | <12.0 msec |
Maximum interface transfer rate | 100 Mbytes/sec. |
RELIABILITY | |
Annual Failure Rate | 0.34 % |
Unrecoverable read errors | 1 in 10^14 |
POWER | |
Average idle current | 7.2 watts |
Average seek power | 12.40 watts |
Standby power | 0.80 watts |
Sleep power | 0.807 watts |
Maximum start current, DC | 2.80 amps |
ENVIRONMENT | |
Ambient Temperature | |
Operating | 0 to 60 degrees C |
Nonoperating | -40 to 70 degrees C |
Maximum operating temperature change | 20 degrees C per hour |
Maximum nonoperating temperature change | 30 degrees C per hour |
Maximum operating case temperature | 69 degrees C |
Relative Humidity | |
Operating | 5 to 90 |
Nonoperating | 5 to 95 |
Maximum allowable humidity change | 30 per hour |
Altitude | |
Operating altitude (min) | -60.96 meters (-200 feet) |
Operating altitude (max) | 3,048 meters (10,000 feet) |
Nonoperating altitude (min) | -60.96 meters (-200 feet) |
Nonoperating altitude (max) | 12,192 meters (40,000 feet) |
Shock | |
Operating Shock (max) | 63 Gs at 2 msec |
Nonoperating Shock (max) | 300 Gs at 2 msec |
Vibration | |
Operating vibration | 0.5 Gs at23-350 Hz |
Nonoperating vibration | 5.0 Gs at 23-350 Hz |
ACOUSTICS | |
Acoustics (Idle Volume) | 2.8 bels |
Acoustics (Seek Volume) | 3.7 bels |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty