Seagate Part #/MPN: ST3500830A
DiscTech Item #: SGT-ST3500830A-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 500GB
Speed: 7,200RPM
Interface Types: IDE ATA 3.5in
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 72
Average Seek Time: 11 / 12
Electrical Interface: EIDE Ultra ATA100 100MBps
On-Board Cache: 16MB
Seagate Barracuda 7200.10 500GB 7.2K IDE ATA/100 Hard Drive - New Pull
The Seagate Barracuda 7200.10 desktop hard drive features innovative perpendicular recording technology and is the first drive on the market to provide capacities up to 750 GB. Barracuda 7200.10 hard drives deliver superb performance, efficiency, speed and durability for all your application needs.
- Perpendicular recording technology for maximum drive capacity and reliability
- 16-MB cache buffer
- Ultra-fast performance
- Superb reliability
- Whisper-quiet operation
- Enhanced G-Force Protection against handling damage
Drive specification | ST3500630A | ST3500830A |
Formatted Gbytes (512 bytes/sector)* | 500 | |
Guaranteed sectors | 976,773,168 | |
Bytes per sector | 512 | |
Default sectors per track | 63 | |
Default read/write heads | 16 | |
Default cylinders | 16,383 | |
Recording density in BPI (bits/inch max) | 813,000 | |
Track density TPI (tracks/inch avg) | 145,000 | |
Areal density (Mbits/inch2 avg) | 114,400 | |
Spindle speed (RPM) | 7,200 | |
Internal data transfer rate (Mbytes/sec max) | 1,030 | |
Sustained transfer rate OD (Mbytes/sec) | 72 | |
I/O data transfer rate (Mbytes/sec max) | 100 | |
ATA data-transfer modes supported | PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5 | |
Cache buffer | 16 Mbytes | 16 Mbytes |
Height (max) | 26.11 mm (1.028 inches) | |
Width (max) | 101.85 mm (4.010 inches) | |
Length (max) | 146.99 mm (5.787 inches) | |
Weight (max) grams / lb. | 635 / 1.39 | |
Average latency (msec) | 4.16 | |
Power-on to ready (typical) | 15 sec | |
Standby to ready (typical) | 15 sec | |
Track-to-track seek time (msec typical) | 0.8 (read), 1.0 (write) | |
Average seek, read (msec typical) | 11.0 | |
Average seek, write (msec typical) | 12.0 | |
Startup current (typical) 12V (peak) | 2.8 amps | |
Seek power (typical) watts | 9.9 | |
Operating power (typical) watts | 9.2 | |
Idle mode (typical) watts | 7.2 | |
Standby mode (typical) watts | 1.2 | |
Sleep mode | 1.2 | |
Voltage tolerance (including noise) | 5V ± 5% 12V ± 10% | |
Ambient temperature | 0° to 60°C (op.) –40° to 70°C (nonop.) | |
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty