Seagate ST380011AS 80GB SATA Hard Drive

Seagate Part #/MPN: ST380011AS

DiscTech Item #: SGT-ST380011AS-RF-OE-DEL


$39.00
  • Special Order - Ships in 5-10 business days
    Special Order - Ships in 5-10 business days

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.

$39.00

Capacity: 80GB

Speed: 7,200RPM

Interface Types: SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Sustained Throughput: 58

Average Seek Time: 8.5/9.5

Electrical Interface: SATA 300 - 3.0Gbps

On-Board Cache: 2MB

Seagate ST380011AS 80GB 3.5" 3Gbps 7.2K RPM Barracuda 7200.7 SATA HDD - Refurbished OEM

Seagate ST380011AS 80GB, 3.0 Gbps, 7,200 RPM, Barracuda 7200.7 Serial ATA Hard Disk Drive - Refurbished

Alt MPN: G1698, 0G1698, 9W2013-358

These drives provide the following key features:

  • 7,200 RPM spindle speed
  • 2 Mbyte buffer
  • High instantaneous (burst) data-transfer rates (up to 150 Mbytes per second).
  • Giant Magneto Resistive (GMR) recording heads and EPRML technology, provide the drives with increased areal density.
  • State-of-the-art cache and on-the-fly error-correction algorithms.
  • Full-track multiple-sector transfer capability without local processor intervention.
  • Quiet operation.
  • 350 Gs nonoperating shock.
  • SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
  • The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives.
  • Support for S.M.A.R.T. drive monitoring and reporting.
  • Support for Read Multiple and Write Multiple commands.
  • Native Command Queuing enabled on some models.


Compatibility:

This drive is compatible with any server that accepts 3.5"x1.0" (LFF) SATA drives.

SPECIFICATIONS
Model NumberST3500411SV
Alt Model NumberG1698,
0G1698,
9W2013-358
GenerationBarracuda 7200.7
Formatted Gbytes (512 bytes/sector)80GB
Guaranteed sectors156,301,488
Bytes per sector512
Default sectors per track63
Default read/write heads16
Default cylinders16,383
Physical read/write heads2
Discs1
Recording density in BPI (bits/inch max)595,000
Track density TPI (tracks/inch max)94,600
Areal density (Gbits/inch max)56.3
Spindle speed (RPM)7,200
Internal transfer rate (Mbytes/sec max)85.4
Sustained transfer rate OD (Mbytes/sec)58
I/O data transfer rate (Mbytes/sec max)150
ATA data-transfer modes supportedSATA 1.0, SATA II
PIO modes 0-4
Multiwood DMA modes 0-2
Ultra DMA modes 0-6
Cache buffer2 Mbytes
Height (max)26.035 mm (1.028 inchs)
Width (max)101.6 mm (4.000 inches)
Length (max)146.99 mm (5.787 inches)
Weight (typical)635 grams (1.4 lb)
Average latency (msec)4.16
Power-on to ready (typical)10 sec
Standby to ready (typical)10 sec
Startup current (typical) 12V (peak)2.8 amps
Track-to-track seek time (msec typical)<1.0 (read), <1.2 (write)
Average seek, read (msec typical)8.5
Average seek, write (msec typical)9.5
Voltage tolerance (including noise)5V ± 5%
12V ± 10%
Ambient temperature0° to 60°C (op.)
-40° to 70°C (nonop.)
Temperature gradient (°C per hour max)20°C (operating)
30°C (nonoperating)
Relative humidity5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient30% per hour max
Wet bulb temperature (°C max)33 (operating)
40 (nonoperating)
Altitude, operating-60.96 m to 3,048 m
(-200 ft to 10,000+ ft)
Altitude, non operating (meters below mean sea level, max)-60.96 m to 12,192 m
(-200 ft to 40,000+ ft)
Shock, operating (Gs max at 2 msec)63
Shock, nonoperating (Gs max at 2 msec)350 Gs
Vibration, operating5-22 Hz: Limited displacement
23-350 Hz: 0.5 G acceleration
Vibration, nonoperating5-22 Hz: Limited displacement
23-350 Hz: 5.0 Gs
Drive acoustics, sound power (bels)
Idle

<2.5 (typical)
2.7 (max)
Performance seek3.4 (typical)
3.7 (max)
Nonrecoverable read errors1 per 10e14 bits read
Mean time between failures (power-on hours)600,000
Contact start-stop cyclrs (25°C, 40% relative humidity)50,000
Supports operation per SATA II specificationYes
DC POWER REQUIREMENTS
Spin Up
12V typ amps

2.8 (peak)
Idle
Average (watts, 25°C)
5V typ amps
12V typ amps

7.5
0.487
0.422
Idle (with offline activity)
Average (watts, 25°C)
5V typ amps
12V typ amps

9.3
0.875
0.41
Operating (40% r/w, 40% seek, 20% inop.
Average (watts, 25°C)
5V typ amps
12V typ amps

12.0
0.631
0.737
Seeking
Average (watts, 25°C)
5V typ amps
12V typ amps

12.5
0.405
0.873
Standby/Sleep
Average (watts, 25°C)
5V typ amps
12V typ amps

1.0
0.185
0.006

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Alternate MPNs: G1698 0G1698 9W2013-358

Weight: 1.8 lb

Warranty: 1 Year DiscTech

Refurbished

Condition Levels Explained

These products have had NO problems or failures, they merely have some usage. The product has been professionally returned to excellent condition. These items have been fully tested, formatted (if appropriate) &repackaged. Hard drives are fully vetted for surface defects and wear, only healthy disks are approved for resale to our customers. Please see our refurbishing process for more details. Watch a video about our refurbishing process

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty