ADAPTEC Part #/MPN: 5805
DiscTech Item #: ADP-5805-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: SAS Serial Attached SCSI, SATA
Electrical Interface: SAS-1 Serial Attached SCSI - 3.0Gbps
On-Board Cache: 512MB
Adaptec 5805 SAS Serial Attached SCSI 8 port RAID Controller PCI-e - New Pull
This controller has 2x SFF-8087 internal connectors.
Serial Attached SCSI (SAS) is the enterprise storage interface that takes SCSI into new dimensions of performance, flexibility and scalability. With SAS you can enjoy performance many times faster than traditional SCSI and mix and match SAS and Serial ATA (SATA) drives for cost and performance optimization.
The Adaptec Serial Attached SCSI RAID 5805 PCI-e card is an eight-port controller that supports SAS, SATA or SATA II disk drives. It features the Adaptec RAID Code (ARC) with standard RAID 0, 1, 5, 10, 50, JBOD as well as the Adaptec Advanced Data Protection Suite with RAID 1E, 5EE, 6, 60, Copyback Hot Spare and optional Snapshot Backup. The card has 128 MB of ECC-protected DDR DRAM and a battery unit is optional.
The Adaptec RAID 5805 supports a broad range of operating systems, compatibility with more than 300 third-party devices, and full integration with Adaptec Storage Manager™ for centralized management of all Adaptec RAID controllers on the network.
Intelligent Power Management - Reduce Power by up to 70%
The power required by disks is a primary ongoing storage cost. Full power is maintained to every disk whether it is actively being used or not, which also increases cooling costs. Adaptec Intelligent Power Management slashes power and cooling costs by spinning down idle disks and providing a lower power mode for active disks.
This controller has 2x SFF-8087 internal connectors.
Adaptec p/n: 2244100-R
Compatibility:
Supported Operating Systems | |
Microsoft Windows |
Benefits | |
Performance Unified Serial RAID controller supports both SATA and SAS devices. Ideal for bandwidth intensive storage applications; NAS, OLTP servers, web servers, and digital surveillance. |
Customer Needs | |
High I/O transaction and high bandwidth processing. |
System Environment | |
Departmental and workgroup servers and workstations |
Key RAID Features | |
• Supports 8 direct-attached or up to 256 SATA or SAS disk drives using SAS expanders • RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50 and 60 • Quick initialization • Online Capacity Expansion • Copyback Hot Spare • Dynamic caching algorithm • Native Command Queuing (NCQ) • Background initialization • Hot-plug drive support • RAID Level Migration • Hot spares – global, dedicated, and pooled • Automatic/manual rebuild of hot spares • SAF-TE enclosure management • Configurable stripe size • S.M.A.R.T. support • Up to 512TB array sizes • Multiple arrays per disk drive • Bad stripe table • Dynamic sector repair • Staggered drive spin-up • Bootable array support • Optimized Disk Utilization |
Bus System Interface Type | |
8-lane PCI-e host interface |
External Connectors | |
None. |
Internal Connectors | |
Two SAS connectors SFF-8087 (internal) |
Data Transfer Rate | |
Up to 3Gb/s per port |
Standard RAID Levels
|
Microsoft Windows
Red Hat Linux
SUSE Linux
SCO Openserver
UnixWare
Sun Solaris
FreeBSD
WMware ESX
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Alternate MPNs: 2244100-R
Weight: 1 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty