ADAPTEC Part #/MPN: ASM-00087-01-B
DiscTech Item #: ADP-ASM-00087-01-B-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: SAS Serial Attached SCSI, SATA, SCSI 80pin SCA-2 Hot-Swap
Form Factor: 3.5inx1.0in LFF Hard Drive
Adaptec ASM-00087-01-B SAS / SATA / SCSI 3.5" Hard Drive Tray Caddy for Sanbloc s50 / Snapserver - New Pull
Adaptec ASM-00087-01-B SAS / SATA / SCSI 3.5" Hard Drive Tray Caddy Rev.1 for Sanbloc s50 / Snapserver - New Pull
All Black faced tray fits SAS, SATA and SCSI drives. Hot swappable tray caddy for Adaptec Sanbloc s50 / Snapserver
Alt PN's: ASM-00378-01A
Compatibility:
Adaptec ASM-00087-01-B SAS / SATA / SCSI 3.5" Hard Drive Tray Caddy for Sanbloc s50 / Snapserver - New Pull
All Black tray fits SAS, SATA and SCSI drives. Hot swappable tray caddy for Adaptec Sanbloc s50 / Snapserver and other Adaptec JBOD's.
Adaptec ASM-00087-01-B SAS / SATA / SCSI 3.5" Hard Drive Tray Caddy Rev.1 for Sanbloc s50 / Snapserver - with four screws.
This tray will accept any 3.5" x 1.0" SAS / SATA / SCSI hard drive.
All Black faced tray fits SAS, SATA and SCSI drives. Hot swappable tray caddy for Adaptec Sanbloc s50 / Snapserver and other Adaptec JBOD's
Alt PN's: ASM-00378-01A
Alternate MPNs: ASM-00378-01-A
Weight: 0.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty