PLIANT Part #/MPN: LB150S
DiscTech Item #: PLT-LB150S-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 150GB
Speed: Solid State Memory
Interface Types: SAS Serial Attached SCSI
Form Factor: 2.5inx15mm SFF Server Drive
Sector Size: 512 / 512e
Electrical Interface: SAS-1 Serial Attached SCSI - 3.0Gbps
SSD Type: SLC
Pliant Lightning PT-LB-0150S-00 150GB SSD 2.5" SAS Enterprise Hard Drive - New Pull
Life in the data center has become even more challenging. Many managers are tasked with the impossible—satisfying IT system performance demands without making significant new IT capital investments or bearing the cost burden of increasing floor space. By replacing many high RPM HDDs with a few Pliant Lightning Enterprise Flash Drives (EFDs), data centers can realize significant cost savings and improved performance flexibility, while substantially reducing capital, space and energy requirements. Pliant Lightning EFDs exceed the expectations of stringent global IT green initiatives.
The Pliant Lightning family of EFDs is available in 3.5-inch and 2.5-inch standard form factors, capacities from 150GB to 300GB and all with Serial Attached SCSI (SAS) interface to fit a range of storage and server systems requirements.
Model #: LB 150S / LB150S
Part#: PT-LB-0150S-00 / PT-LB-0150S-20
Compatibility:
This drive is compatible with any of our SAS drive trays and any of our SAS controllers.
Drive specification | Pliat 150S |
Host Interface | SAS 3Gbps |
Interface Ports | 2 (Full Duplex) |
Capacity | 150GB |
Sector Sizes Supported | 512, 520, or 528 bytes per sector |
Flash Memory Technology | SLC NAND |
Data Throughput (read/write) | Read>420MB/sec Write>220 MB/sec |
Total IOPS | >120,000 IOPS |
Height | 15.0mm |
Width | 69.85mm |
Length | 100.45mm |
Weight | 0.2 Kg |
Idle | 3.9 watts |
Typical | 5.9 watts |
No Write Chache | No Risk of Data Loss |
Read Endurance | Unlimited |
Write Endurance | Unlimited |
Unrecovered error rate | <1 sector in 1 E10-17 bits read |
End-to-End Data Protection | Yes, Including T10 DIL (SCSI PI) Support |
Patrol Read (automatic) | No performance impact |
Power-on Hours | 8760 hours per year |
MTBF | 2 million hours |
Operating Temperature (ambient) | 0-60C |
Non-Operating Temperature | -40 to 85C |
Start-up Time (power on to ready) | <30 seconds |
Click here to view the manufacturer's item description/brochure
Alternate MPNs: LB0150S PT-LB-0150S-00 PT-LB-0150S-20
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty