SanDisk SD8SFAT-064G-1122 64GB mSATA Solid State Drive

SANDISK Part #/MPN: SD8SFAT-064G-1122

DiscTech Item #: SAN-SD8SFAT-064G-1122-BN-5Y


$56.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$56.00

Capacity: 64GB

Speed: Solid State Memory

Interface Types: SATA

Form Factor: 2.5inx7mm Fits All laptops

Sector Size: 512 / 512e

Sustained Throughput: 546/94

Electrical Interface: SATA 600 - 6.0Gbps

SSD Type: MLC

SSD Endurance DWPD: Consumer / Value

SanDisk Z400s SD8SFAT-064G-1122 64GB 1.8-Inch 6Gbps MLC Consumer mSATA Solid State Drive - Brand New

SanDisk Z400s SD8SFAT-064G-1122 64GB 1.8” 6.0 Gb/s MLC / Multi-Level Cell Consumer / Value Endurance0.3-DWPD / Drive Writes Per Day mSATA / Mini Serial ATA SSD / Solid State Drive - Brand New

Alt Model #: SD8SFAT-064G

SanDisk® Z400s SSD (Solid State Drive)

  • Reliability and Low Power for Embedded Platforms
  • Cost Effective and Reliable HDD Replacement

The SanDisk® Z400s SSD delivers the performance, capacities, and form factors SATA SAS PCIe ideal for replacing HDDs in embedded systems. Competitively priced, it can outperform HDDs by a factor of 20 and is 5 times more reliable at 1/20th the power consumption. Companies looking to design sleek, green products will also appreciate its silent, low power, and low heat characteristics.

The Z400s is highly versatile and can accommodate a wide range of embedded platforms. It is available in 2.5”/7mm cased, M.2 (2242 & 2280), and mSATA form factors with capacities of 32GB, 64GB, 128GB, and 256GB, which makes it ideal for verticals such as:

  • ATMs and interactive kiosks used in a variety of industries, including banking, hotels, and healthcare
  • POS systems in the retail, hospitality, and restaurant industries that process numerous daily transactions
  • Digital signage used in retail and commercial spaces

The Z400s has also been validated for use in several of the top OEM platforms in the industry, demonstrating its endurance and ability to sustain high-volume transactions. Its solid-state design means there are no moving parts, making it shock-resistant and much more reliable than traditional HDDs, which translates into lower total cost of ownership (TCO) and a better end-user experience.

Reliability & TCO
The SanDisk Z400s SSD can improve total cost of ownership (TCO) by reducing downtime and service requests due to hard drive failures. Its solid-state design means there are no moving parts, making it shock-resistant and much more reliable than traditional HDDs.

Endurance
The Z400s is able to sustain a high volume of transactions, which is well-suited for POS systems, ATMs, and other embedded platforms that handle frequent transactions.

Low Power
The Z400s utilizes breakthrough SanDisk technology that optimizes power consumption, making it one of the lowest power consuming SSDs at 30mW for average power. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices

Its low power characteristics mean it generates very little heat, making the Z400s perfect for green and fanless designs.

TCO
SanDisk SSDs are more reliable than HDDs, which can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs* , so users may experience a noticeable improvement in responsiveness. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the Z400s SSD, thus prolonging replacement cycles and maximizing asset value.

Z400S KEY FEATURES

  • VERTICALLY INTEGRATED VALIDATION
  • 32GB-256GB CAPACITIES IDEAL FOR EMBEDDED APPLICATIONS
  • 2.5”/7MM CASED, M.2 (2242 & 2280), AND MSATA FORM FACTORS
  • LOW POWER, LOW HEAT FOR FANLESS AND GREEN DESIGNS
  • TESTED FOR 20 TBW (32GB), 40 TBW (64GB), AND 72 TBW (128 AND 256GB)
  • HIGHER RELIABILITY THAN HDDS
  • SATA REVISION 3.2 6GB/S INTERFACE
  • WINDOWS® EMBEDDED CERTIFIED


Compatibility:

The Z400s is highly versatile and can accommodate a wide range of embedded platforms.

SanDisk Z400s SSD
Model NumberSD8SFAT-064G-1122 / SD8SBAT-064G
Specification
Form FactormSATA
InterfaceSATA III (6 Gb/s)
backward compatible to SATA II and I
Size3.82mm x 29.85mm x 50.8mm @ 5 ± 0.5g
Capacity64GB
Performance [4KB QD1]
Seq. Read up to (MB/s)546
Seq. Write up to (MB/s)94
Rand Read up to (IOPS)32,900
Rand Write up to (IOPS)21,700
Endurance (TBW)40
Power (Average)
Average Power (mW)30
Active Power (W)1.6
Max Read Operating (mW)1,600
Max Write Operating (mW)1,500
Slumber (mW)14
DEVSLP (mW)≤3
Reliability
MTTFUp to 1,750,000 hours
Encironmental
Operating Temperatures0°C to 70°C
Non-operating Temperatures-55°C to 85°C
Operating Vibration5.0 gRMS, 10 – 2000 Hz
Non-operating Vibration4.9 gRMS, 7 – 800 Hz
Shock1,500 G @0.5 msec half sine
CertificationsFCC
UL
TUV
KC
BSMI
VCCI

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Weight: 1 lb

Warranty: 5 Year Manufacturer

Brand New

Condition Levels Explained

The product is brand new.

5 Year Manufacturer Warranty

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.