Seagate Part #/MPN: XP7200-1A4096
DiscTech Item #: SGT-XP7200-1A4096-BN-5Y
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Speed: Solid State Memory
Interface Types: PCIe
Form Factor: Full-Height/Half-Length
Sector Size: 512 / 512e
Sustained Throughput: 10,000/3,600
Electrical Interface: PCIe - v3.0 - 16GBps
SSD Type: MLC
SSD Endurance DWPD: Consumer / Value
Seagate Nytro XP7200 XP7200-1A4096 3.8TB FHHL MLC PCI Express / PCIe SSD Add-in Card – Brand New
Seagate Nytro XP7200 XP7200-1A4096 3.8TB / 3800GB Full Height, Half Length Read Intensive 3 Drive Writes Per Day Mult-Level Cell Peripheral Component Interconnect Express 3.0 Solid State Disk Drive Add-in Card / AIC - Brand Nwe
Nytro® XP7200 Add-In Card
Optimizing TCO for high-performance workloadsThe continual growth of big data is increasing the demands on modern data centers for robust storage solutions, better application performance and optimized TCO. The Nytro XP7200 NVMe add-in card delivers industry-leading performance per dollar. By combining multiple SSD controllers into a single PCIe card without any additional cost, power or latency required from a PCIe bridge chip or switch, it enables servers to communicate directly with the four individual controllers through the one motherboard PCIe socket for flexible utilization and scalability.
The Nytro XP7200 add-in card leverages the existing and widely used ×16 PCIe slots in servers while delivering maximum capacity and performance per PCIe slot for high-performance enterprise and hyper scale applications.
Unprecedented Performance of 10GB/s Throughput
The Nytro XP7200 meets the most demanding application requirements with the industry’s highest bandwidth of 10GB/s through a single PCIe slot. By delivering high bandwidth and low latency, it improves QoS and significantly boosts application responsiveness.
The Nytro XP7200 features a PCIe Gen3 ×16 interface with NVMe protocol, which delivers improved latency, consistent response time, high throughput and IOPS performance, all while requiring less CPU utilization.
By leveraging Seagate’s existing enterprise expertise and manufacturing excellence, the Nytro XP7200 delivers the highest levels of data integrity and endurance for critical business applications.
The Nytro XP7200 features end-to-end data protection, LDPC error correction and Seagate RAISE™ technology for solid reliability and endurance. With power-loss data protection, the XP7200 maintains data integrity to help prevent loss of data in the event of unexpected power interruptions.
Key Features and Benefits
- PCIe Gen3 ×16 interface offers four individual PCIe Gen3 ×4 volumes
- NVMe 1.2a protocol for improved latency, consistent response time and high throughput
- Industry’s highest-performance 10GB/s throughput
- Up to 8TB of total raw capacity in a single PCIe add-in card
- Supports standard NVMe drivers for easy deployment in current server platforms and infrastructure
- Power-loss data protection circuit helps prevent data loss after unexpected power interruptions
- End-to-end data protection, LDPC error correction and Seagate RAISE technology for high data integrity and reliability
- UEFI bootable solution
- OCP compliant device
This drive is compatible with any server that accepts Full-Height/Half-Length PCIe drives.
|Nytro® XP7200 Add-In Card|
|Capacity||3.8TB / 3800GB|
|Interface||PCIe Gen3 ×16|
|NAND Flash Type||MLC|
|Form Factor||Full-height, half-length|
|Sequential Read (MB/s) Sustained, 128KB||10,000|
|Sequential Write (MB/s) Sustained, 128KB||3600|
|Random Read (IOPS) Sustained, 4KB QD64||940,000|
|Random Write (IOPS) Sustained, 4KB QD64||160,000|
|Lifetime Endurance (Drive Writes per Day)||0.3|
|Nonrecoverable Read Errors per Bits Read||1 per 10E16|
|Mean Time Between Failures (MTBF, hours)||2 M|
|+12V Max Power (W)||40|
|Average Read/Write Power (W)||26|
|Temperature, Operating (°C) / Airflow||0 to 35 @ 250 LFM|
|Height (in/mm, max)||4.3/111|
|Length (in/mm, max)||6.6/168|
Click here to view the manufacturer's item description/brochure
Weight: 1 lb
Warranty: 5 Year Manufacturer
The product is brand new.
5 Year Manufacturer Warranty
The product has a manufacturer warranty for the time period specified.