Hard Drive Tray / Caddies

Caddies, trays, sleds, brackets for the installation of SAS / SCSI / SATA / Fibre Channel / PATA / IDE hard disks in servers or attached storage arrays with hot swappable / hot pluggable SAS, SATA & 80-pin SCA-2 HDD SCSI interfaces.

For example: Dell PowerEdge Servers, PowerVault, HP Proliant Servers, Compaq Proliant Servers, StorageWorks, IBM Netfinity Servers, System Storage DS, IBM eServer xSeries Servers, Sun Enterprise Servers, StorEdge.

(3 Products)

Dell 51TJV Tray/Caddy Blank

Dell Part #/MPN: 51TJV


Dell (Original) 51TJV tray / caddy Blank for Dell PowerEdge 800, 1600, 1600SC, 1800, 1850, 2600, 2650, 2800, 2850, 3250, 6600, 6650, 6800, 6850, 7150, Series Servers; PowerVault 220S, 221S, 220F, 650F, 660F SCSI Arrays.

Dell Part # (DPN): 051TJV

Used Pull Dell Original

Not to be used for actual SCSI hard drive mounting. This is only a blank used to fill in extra unused slots

$4.95

Dell 9D988 / H7206 / YC340 / N6747 / D969D / J2169 Hard Drive Tray / Caddy

Dell Part #/MPN: 9D988


Interface Types: SCSI 80pin SCA-2 Hot-Swap

Form Factor: 3.5inx1.0in LFF Hard Drive

$35.00

Dell 9D988 / H7206 / N6747 / D969D / J2169 / M5084 Hard Drive Tray/Caddy

Dell Part #/MPN: 9D988


Interface Types: SCSI 80pin SCA-2 Hot-Swap

Form Factor: 3.5inx1.0in LFF Hard Drive

$19.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.