68pin - 50pin SCSI Adapter with High-Byte Termination

This item is EOL and no longer available. Please refer to the non High-Byte version HD68 Male to IDC50 Male Non High Byte Terminator

68pin HD68M to 50pin Male SCSI Adapter with High-Byte Termination

68-pin Male to 50-pin Male adapter (allows you to use ANY 68 pin device in PCs with 50pin internal SCSI controllers).

This adapter is popular with older Apple Macintosh owners, as they oftern have 50-pin internal SCSI interfaces

This adapter adds approximately 1.5 inches to the length of the drive.

The 50pin SCSI interface (8 bit) was widely used in desktop computers until about 1996. It is limited to Narrow/Fast SCSI II which has a limit of just 10MB/s. Examples of 50pin SCSI are often found in Apple SE, SE30; II, IIx, IIci, IIsi, IIvi, IIvx; Apple Performa, LC I, II, III, 400, 405, 430, 450, 460, 475, 600, 611x Series; Apple Centris 610, 650, 660av, Apple Quadra 605, 610, 650, 660av, 700, 800, 840av, 900, 950, Apple PowerMac 6100, 7100 8100, 6400, 6500, 7200, 7300, 7500, 7600, 8500, 8600, 9500, 9600, G3 , PowerComputing computers, All Umax workstations, & Most Motorola StarMax and StarMax based Mac clone computers, older PCs with SCSI support, most older SCSI CD-ROM and internal tape drives.

68pin to 50pin SCSI Adapter

68-pin male to 50-pin male SCSI Adapter.

Makes the back of the drive about 1.5" deeper.

Weight: 0.2 lb

Warranty: 1 Year DiscTech

Brand New

1 Year DiscTech Warranty