Dell Part #/MPN: 44TXF
DiscTech Item #: DEL-PERC2-64MB-UP-OE
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: SCSI 68pin HD68 Female, SCSI VHDCI, PCI
Form Factor: Full-Height/Half-Length
Electrical Interface: SCSI Ultra2 Wide - 80MBps 16-bit
On-Board Cache: 64MB
Dell 44TXF PERC 2/DC Dual Channel LVD SCSI RAID Controller, Battery Backup (BBU), 64MB Cache - Used Pull
The Dell™ PowerEdge™ Expandable RAID Controller Dual Channel PERC 2/DC 44TXF PCI RAID controller is a high performance intelligent Peripheral Component Interconnect (PCI)-to-Small Computer System Interface (SCSI) host adapter with RAID control capabilities. The PERC 2/DC provides reliability, high performance, and fault-tolerant disk subsystem management. PERC 2/DC is an ideal RAID solution for the internal strorage of Dell's workgroup, departmental, and enterprise systems. PERC 2/DC offers a cost-effective way to implement RAID in a server. PERC 2/DC has two Wide Ultra2 Low Voltage Differential (LVD) SCSI channels supporting data transfer rates up to 80 Megabytes per second (MB/s) per channel.
0, 1, 5, 10, and 50.
Maximum number of drives per channel
Array interface to host
Fast and Wide Ultra/2 SE/ LVD
Cache memory size
64 MB and 128 MB SDRAM
Write-back, Write-through, Adaptive Read Ahead, Non Read Ahead, Read Ahead
Multiple logical drives/arrays per controller
Up to 8 logical drives per controller
Maximum number of PERC 2/DC controllers per system
Consult your PowerEdge Server User's Guide or contact your Dell representative.
Online capacity expansion
Dedicated and pool hot spare
Hot swap devices supported
Non-disk devices supported
Mixed capacity hard disk drives
Number of 16-bit internal connectors
Click here to view the manufacturer's item description/brochure
Weight: 2 lb
Warranty: 1 Year DiscTech
The product has been removed from a working system (e.g. server). These products vary in their usage due to age of system & type of service etc.. However, Used System Pulls are fully tested and all handling is performed by trained technicians, taking full ESD precautions.