Samsung SpinPoint P Series HD160JJ 160BG 7.2K SATA Hard Drive

(0) No Reviews Yet

SAMSUNG Part #/MPN: HD160JJ

DiscTech Item #: SAM-HD160JJ-NP-OE


$89.00
$89.00

Capacity: 160GB

Speed: 7,200RPM

Interface Types: SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Sustained Throughput: 61

Electrical Interface: SATA 300 - 3.0Gbps

On-Board Cache: 16MB

Samsung SpinPoint P Series HD160JJ 160GB 7.2K  SATA 3.5" Hard Drive - New Pull

Superior reliability — tested to 1 million hours MTBF at high duty cycle, these enterprise drives are designed and manufactured to provide server-class reliability.

Fast — with up to 3.0 Gb/s data transfer rate, and up to 16 MB cache, these drives deliver optimum performance in nearline server environments.

Low power — Active Power Save™ delivers best-in-class seek mode power consumption through advanced WD firmware that conserves power in active seek modes without degrading performance.

RAID-specific, time-limited error recovery (TLER) — a feature pioneered by WD that significantly reduces drive fallout caused by extended drive error-recovery processes common to desktop drives.

  • formatted capacity : 160GB
  • native serial ATA (3.0Gbps) with Native Command Queuing (NCQ)
  • fluid dynamic bearing spindle motor technology
  • high speed dual Digital Signal Processor (DSP) based architecture

Compatibility:

This drive is compatible with any of our SATA hot swap trays and controllers.

Specifications
Model number HD160JJ
Model Name SpinPoint P Series
Formatted Capacity 160 Gbytes 
Rotational Speed 7,200 rpm
Default Buffer (cache) Size 16 Mbytes
Performance
External (I/O) Transfer Rate (max) 3.0 Gb/s
Average Latency 4.2 msec
Physical
Form Factor(width) 3.5-inch
Form Factor(height) 1-inch
Height 25.4 mm
Width 101.6 mm
Length 146.05 mm
Reliability
MTBF (Hours) 1,000,000 hours
Nonrecoverable Read Errors 1 per 10^14 bits read

Click here to view the manufacturer's item description/brochure

Weight: 1.8 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty

Ratings & Reviews

No reviews available

Be the first to Write a Review