SANDISK Part #/MPN: SD8SMAT-128G-1122
DiscTech Item #: SAN-SD8SMAT-128G-1122-BN-5Y
- Brand NewCondition Levels Explained
The product is brand new.
- Warranty:5 Year ManufacturerProduct Warranties Explained
The product has a manufacturer warranty for the time period specified.
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 128GB
Speed: Solid State Memory
Interface Types: SATA, SATA M.2 NGFF
Form Factor: M.2 x 42mm
Sector Size: 512 / 512e
Sustained Throughput: 546/182
Electrical Interface: SATA 600 - 6.0Gbps
SSD Type: MLC
SSD Endurance DWPD: Consumer / Value
SanDisk Z400s SD8SMAT-128G-1122 128GB M.2 2242 6Gbps MLC Consumer SATA Solid State Drive - Brand New
SanDisk Z400s SD8SMAT-128G-1122 128GB M.2 2242 6.0 Gb/s MLC / Multi-Level Cell Consumer / Value Endurance 0.3-DWPD / Drive Writes Per Day SATA / Serial ATA SSD / Solid State Drive - Brand New
Alt Model #: SD8SMAT-128G
SanDisk® Z400s SSD (Solid State Drive)
- Reliability and Low Power for Embedded Platforms
- Cost Effective and Reliable HDD Replacement
The SanDisk® Z400s SSD delivers the performance, capacities, and form factors SATA SAS PCIe ideal for replacing HDDs in embedded systems. Competitively priced, it can outperform HDDs by a factor of 20 and is 5 times more reliable at 1/20th the power consumption. Companies looking to design sleek, green products will also appreciate its silent, low power, and low heat characteristics.
The Z400s is highly versatile and can accommodate a wide range of embedded platforms. It is available in 2.5”/7mm cased, M.2 (2242 & 2280), and mSATA form factors with capacities of 32GB, 64GB, 128GB, and 256GB, which makes it ideal for verticals such as:
- ATMs and interactive kiosks used in a variety of industries, including banking, hotels, and healthcare
- POS systems in the retail, hospitality, and restaurant industries that process numerous daily transactions
- Digital signage used in retail and commercial spaces
The Z400s has also been validated for use in several of the top OEM platforms in the industry, demonstrating its endurance and ability to sustain high-volume transactions. Its solid-state design means there are no moving parts, making it shock-resistant and much more reliable than traditional HDDs, which translates into lower total cost of ownership (TCO) and a better end-user experience.
Reliability & TCO
The SanDisk Z400s SSD can improve total cost of ownership (TCO) by reducing downtime and service requests due to hard drive failures. Its solid-state design means there are no moving parts, making it shock-resistant and much more reliable than traditional HDDs.
Endurance
The Z400s is able to sustain a high volume of transactions, which is well-suited for POS systems, ATMs, and other embedded platforms that handle frequent transactions.
Low Power
The Z400s utilizes breakthrough SanDisk technology that optimizes power consumption, making it one of the lowest power consuming SSDs at 30mW for average power. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices
Its low power characteristics mean it generates very little heat, making the Z400s perfect for green and fanless designs.
TCO
SanDisk SSDs are more reliable than HDDs, which can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs* , so users may experience a noticeable improvement in responsiveness. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the Z400s SSD, thus prolonging replacement cycles and maximizing asset value.
Z400S KEY FEATURES
- VERTICALLY INTEGRATED VALIDATION
- 32GB-256GB CAPACITIES IDEAL FOR EMBEDDED APPLICATIONS
- 2.5”/7MM CASED, M.2 (2242 & 2280), AND MSATA FORM FACTORS
- LOW POWER, LOW HEAT FOR FANLESS AND GREEN DESIGNS
- TESTED FOR 20 TBW (32GB), 40 TBW (64GB), AND 72 TBW (128 AND 256GB)
- HIGHER RELIABILITY THAN HDDS
- SATA REVISION 3.2 6GB/S INTERFACE
- WINDOWS® EMBEDDED CERTIFIED
Compatibility:
This drive is compatible with laptops that accept 2.5" x 15mm SFF SAS drives.
SanDisk Z400s SSD | |
---|---|
Model Number | SD8SBAT-128G-1122 / SD8SBAT-128G |
Specification | |
Form Factor | 2.5"/7mm cased |
Interface | SATA III (6 Gb/s) backward compatible to SATA II and I |
Size | 7.00mm x 69.85mm x 100.5mm @ 30 ± 1g |
Capacity | 128GB |
Performance [4KB QD1] | |
Seq. Read up to (MB/s) | 546 |
Seq. Write up to (MB/s) | 182 |
Rand Read up to (IOPS) | 35,500 |
Rand Write up to (IOPS) | 43,300 |
Endurance (TBW) | 72 |
Power (Average) | |
Average Power (mW) | 30 |
Active Power (W) | 1.6 |
Max Read Operating (mW) | 1,600 |
Max Write Operating (mW) | 1,900 |
Slumber (mW) | 14 |
DEVSLP (mW) | ≤3 |
Reliability | |
MTTF | Up to 1,750,000 hours |
Environmental | |
Operating Temperatures | 0°C to 70°C |
Non-operating Temperatures | -55°C to 85°C |
Operating Vibration | 5.0 gRMS, 10 – 2000 Hz |
Non-operating Vibration | 4.9 gRMS, 7 – 800 Hz |
Shock | 1,500 G @0.5 msec half sine |
Certifications | FCC UL TUV KC BSMI VCCI |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Alternate MPNs: SD8SMAT-128G
Weight: 1 lb
Warranty: 5 Year Manufacturer
Brand New
The product is brand new.
5 Year Manufacturer Warranty
The product has a manufacturer warranty for the time period specified.