Seagate Part #/MPN: ST3300655SS
DiscTech Item #: SGT-ST3300655SS-NP-OE-DEL
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 300GB
Speed: 15,000RPM
Interface Types: SAS Serial Attached SCSI
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Electrical Interface: SAS-1 Serial Attached SCSI - 3.0Gbps
On-Board Cache: 16MB
Compatible Systems: Dell 10th Gen. 2950 / 6950
Seagate Cheetah ST3300655SS 15K.5 300GB 15K 3.0Gbps Serial SCSI / SAS Hard Drive - New Pull
Seagate Cheetah ST3300655SS 15K.5 300GB 15K 3.0Gbps Serial SCSI / SAS Hard Drive - New Pull
Alt. PN: GM251, WR712, 9Z1066-051, 9Z1066 GP880, 0GP880
Features | Benefits |
15K RPM spindle speed | Delivers more I/O's per second and faster sustained transfer rates than 10K 3.5-inch drvies, enabling the same high performance to be met with fewer drives. |
Background Media Scan (BMS) | Second generation Seagate-exclusive BMS proactively scans the media for potential defects during drive idle time. It enables incipient errors to be corrected before data is lost. |
Perpendicular Recording | Perpendicular recording is fundamentally superior, enabling the highest areal density with 30 percent higher performance. |
Nonrecoverable Error Rate | The nonrecoverable error rate has been improved by a factor of 10. |
Idle Read After Write (IRAW) | Seagate-exclusive IRAW enhances data protection by verifying-during drive idle time-that data in the drive buffer was properly written. |
|
Compatibility:
All SAS compatible servers including:
Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays
Specifications | 300 GB |
---|---|
Model Number | ST3300655SS |
Interface | SAS 3Gb/s |
Cache | 16 MBytes |
Capacity | 300 GB |
Areal density (avg) | 110000 Gbits/inch2 |
Guaranteed Sectors | 286749488 |
Number of pins on the I/O connector | 5 |
PHYSICAL | |
Height (max) | 26.11 mm (1.028 inches) |
Width (max) | 101.85 mm (4.010 inches) |
Length (max) | 146.99 mm (5.787 inches) |
Weight (typical) | 839 grams (1.85 pounds) |
PERFORMANCE | |
Spindle Speed | 15000 rpm |
Average latency | 2.0 msec |
Random read seek time | 3.50 msec |
Random write seek time | 4.0 msec |
RELIABILITY | |
MTBF | 1400000 hours |
Annual Failure Rate | 0.62 |
Power-on hours | 8760 hours |
Unrecoverable read errors | 1 in 10^16 |
Recoverable read errors | 10 in 10^12 |
ENVIRONMENT | |
Ambient Temperature | |
Operating | 5 to 55 degrees C |
Nonoperating | -40 to 70 degrees C |
Maximum operating temperature change | 20 degrees C per hour |
Maximum nonoperating temperature change | 20 degrees C per hour |
Minimum operating case temperature | 5 degrees C |
Maximum operating case temperature | 50 degrees C |
Relative Humidity | |
Operating | 5 to 95 % |
Nonoperating | 5 to 95 % |
Maximum allowable humidity change | 20 % per hour |
Altitude | |
Operating altitude (min) | -305 meters (-1000 feet) |
Operating altitude (max) | 3048 meters (10000 feet) |
Nonoperating altitude (min) | -305 meters (-1000 feet) |
Nonoperating altitude (max) | 12210 meters (40000 feet) |
Shock | |
Operating Shock (max) | 60 Gs at 2 msec |
Nonoperating Shock (max) | 250 Gs at 2 msec |
Vibration | |
Operating vibration | 0.5 Gs at 10 to 500 Hz |
Nonoperating vibration | 2.0 Gs at 22 to 500 Hz Hz |
Alternate MPNs: GM251 0GM251 341-4461 WR712 9Z1066-051 9Z1066 GP880 0GP880 0HT953 HT953
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty