3Com 3C905 10/100 Mbps Ethernet Adapter

- Used PullCondition Levels Explained
The product has been removed from a working system (e.g. server). These products vary in their usage due to age of system & type of service etc.. However, Used System Pulls are fully tested and all handling is performed by trained technicians, taking full ESD precautions.
- In Stock:8Need more?Stock Levels
This stock level is real time and accurate. This quantity is available for same-day shipment. Larger quantities can take up to a week to ship. Call us for larger quantities that you need urgently.
- 1 Year DiscTechWarrantyProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
Interface Types: | Ethernet RJ45 |
Description
3Com 3C905 10/100 Mbps PCI Ethernet Adapter - Used Pull
These Etherlink NICs are guaranteed to work with every major PC/network operating system and any IBM-compatible PC with an available PCI slot. Built to last, they’ll work with a broad range of hubs and half- and full-duplex switches. And they’re so easy to set up—these NICs come with automated installation for Windows PCs.
The 3C905 NIC has the following features:
- Dynamic Access features to optimize network performance.
- PCI interface
- Interactive Access technology to minimize CPU utilization.
- PACE drivers that enable prioritization of applications such as video.
- Distributed RMON agents (dRMON).
- Parallel Tasking architecture for high throughput and low processor utilization.
- Full-duplex 10/100 Mbps support.
- Automatic selection of media type.
- 32-bit bus master design.
- Microsoft® Windows® automatically senses the presence of the 3C905 NIC and loads the network driver from the 3Com EtherDisk diskette.
- Windows-based diagnostics program for that provides a graphical interface to 3Com's diagnostic and configuration tools.
- AutoLink installation software, which automatically installs all Novell® NetWare® DOS ODI client software into your operating system.
- Status LED.
- Single shielded RJ-45 connector (3C900-TPO).
- Support for Category 3, 4, or 5 UTP cabling for 10/100 Ethernet networks.
- Remote network management support.
Specifications
These Etherlink NICs are guaranteed to work with every major PC/network operating system and any IBM-compatible PC with an available PCI slot. Built to last, they’ll work with a broad range of hubs and half- and full-duplex switches. And they’re so easy to set up—these NICs come with automated installation for Windows 98/95 PCs.
The 3C905 NIC has the following features:
- Dynamic Access features to optimize network performance.
- PCI Interface
- Interactive Access technology to minimize CPU utilization.
- PACE drivers that enable prioritization of applications such as video.
- Distributed RMON agents (dRMON).
- Parallel Tasking architecture for high throughput and low processor utilization.
- Full-duplex 10 Mbps support.
- Automatic selection of media type.
- 32-bit bus master design.
- Microsoft® Windows automatically senses the presence of the 3C905 NIC and loads the network driver from the 3Com EtherDisk diskette.
- Windows-based diagnostics program for Windows that provides a graphical interface to 3Com's diagnostic and configuration tools.
- AutoLink installation software, which automatically installs all Novell® NetWare® DOS ODI client software into your operating system.
- Status LED.
- Single shielded RJ-45 connector (3C905-TPO).
- Support for Category 3, 4, or 5 UTP cabling for 10/100 Ethernet networks.
- Remote network management support.
Alternate MPNs: 3C905-TPO
Weight: 2 lb
Warranty: 1 Year DiscTech
Condition
Used Pull
Warranty
1 Year DiscTech Warranty