CISCO UCS 800-37836-02 3.5in LFF Hot Swap SAS / SATA Hard Drive Tray / Caddy / Sled

CISCO Part #/MPN: 800-3786-02

DiscTech Item #: CIS-800-37836-02-NP-OE

$49.00
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back
$49.00

Interface Types: SAS Serial Attached SCSI, SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

CISCO UCS 800-37836-02 3.5in LFF Hot Swap SAS / SATA Hard Drive Tray / Caddy / Sled - New Pull

CISCO UCS 800-37836-02 3.5in LFF Hot Swap SAS / SATA Hard Drive Tray / Caddy / Sled with Screws

This is the same tray as the 800-37836-01.  The only difference is the extra screw holes for the Disctech Part number: DEL-Y004G-BN-OE  2.5" to 3.5" insert for SSD or 2.5" SFF drives, sold separately.


Compatibility:

This tray / caddy is compatible with the following Cisco UCS servers:

Cisco UCS C240 Server

Cisco UCS C220 Server

Cisco UCS C460 Server

Cisco UCS B200 Server

CISCO UCS 800-37836-02 3.5in LFF Hot Swap SAS / SATA Hard Drive Tray / Caddy / Sled

This tray will accept any 3.5" x 1.0" LFF Large Form Factor SAS / SATA hard drive.


040-001-334

ROHS Compliant

Alternate MPNs: 800-37836-02-A0

Weight: 0.4 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty