Cisco AIR-CAP2702E-B-K9 Controlled-Based Wireless Access Point

CISCO Part #/MPN: AIR-CAP2702E-B-K9

DiscTech Item #: CIS-AIR-CAP2702E-B-K9-BN-OE


$879.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$879.00

Enterprise Grade

Interface Types: Ethernet RJ45

Encryption/SED Supported

Electrical Interface: Ethernet Gigabit - 1Gbps

On-Board Cache: 512MB

Wattage/VA: 15W

Cisco 2702E Aironet AIR-CAP2702E-B-K9 Controller-Based Indoor PoE Wireless Access Point w/ External Antenna - Brand New

Cisco 2702E Aironet AIR-CAP2702E-B-K9 Controller-Based Indoor PoE Wireless Access Point with External Antenna - Brand New

Cisco Aironet 2700 Series Access Points

The Cisco® Aironet® 2700 Series of Wi-Fi access points (APs) delivers industry-leading 802.11ac performance at a price point ideal for plugging capacity and coverage gaps in dense indoor environments. The Aironet 2700 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and high-performance laptops now shipping with the faster, 802.11ac Wi-Fi radios.

High Density Experience (HD Experience)
Building on the Cisco Aironet heritage of RF excellence, the 2700 Series APs run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 2700 is a component of a Cisco series of flagship, 802.11ac-enabled APs that delivers a robust mobility experience based on the following product features:

  • 802.11ac with 3x4 multiple-input multiple-output (MIMO) technology supporting three spatial streams. This architecture offers a sustained 1.3-Gbps rates over a greater range for more capacity and reliability than competing APs.
  • Cross-AP Noise Reduction, a Cisco innovation that enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
  • Optimized AP Roaming to ensure that client devices associate with the AP in their coverage range that offers the fastest data rate available.
  • Cisco ClientLink 3.0 technology to improve downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices.<
  • Cisco CleanAir technology enhanced with 80MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference.
  • MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.

The Cisco Aironet 2700 Series sustains higher-speed connections farther from the AP than competing solutions. The result is up to three times greater availability of 1.3-Gbps rates in the Cisco environment for optimum mobile device performance and user experiences.

Cisco also offers the industry’s broadest selection of 802.11n and 802.11ac antennas, delivering optimal coverage to different deployment scenarios.

Scalability
The Cisco Aironet 2700 Series is a component of the Cisco Unified Wireless Network, a foundation for operating both wired and wireless LANs in an integrated manner. The Unified Wireless Network can scale to as many as 18,000 APs with full Layer-3 mobility across locations on the enterprise campus, in branch offices, and at remote sites. The Cisco Unified Wireless Network delivers highly secure access to mobility services and applications. It offers the lowest total cost of ownership (TCO) and investment protection by integrating smoothly with existing wired networks.

Cisco Aironet 2702e Controller-based PoE Access Point
Model NumberAIR-CAP2702E-B-K9
GENERAL
Device TypeWireless Access Point
Ruggedized DesignIn
Width8.7 in
Depth8.7 in
Height2 in
Weight2.2 lbs
PROCESSOR / MEMORY / STORAGE
RAM512 MB
Flash Memory64 MB
NETWORKING
Form FactorExternal
Connectivity TechnologyWireless
Data Transfer Rate450 Mbps
Data Link ProtocolIEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Frequency Band2.4 GHz, 5 GHz
Status IndicatorsStatus
Line Coding FormatCCK
FeaturesAuto-sensing per device, power over Ethernet (PoE), DFS support, Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), ClientLink 2.0 technology, 3T4R MIMO technology, cyclic shift diversity (CSD)
Encryption AlgorithmAES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Authentication MethodMS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant StandardsIEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
EXPANSION / CONNECTIVITY
Interfaces2 x 1000Base-T - RJ-45, 1 x management - RJ-45, 4 x antenna
MISCELLANEOUS
Compliant StandardsVCCI, ICES-003, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, EMC, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, EN 301.893, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN50155, CAN/CSA C22.2 No. 60950-1, EMI, Directive 93/42/EEC
POWER
Power Over Ethernet (PoE) SupportedPoE
Power Consumption Operational15 Watt
ENVIRONMENTAL PARAMETERS
Min Operating Temperature-4 °F
Max Operating Temperature122 °F
Humidity Range Operating10 - 90% (non-condensing)

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Weight: 3 lb

Warranty: 1 Year DiscTech

Brand New

Condition Levels Explained

The product is brand new.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty