Cisco SLM224GT-NA 24-Port Ethernet Switch

CISCO Part #/MPN: SLM224GT-NA

DiscTech Item #: CIS-SLM224GT-NA-BN-FW


$131.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$131.00

Interface Types: Ethernet RJ45, GBIC

Electrical Interface: Ethernet Fast - 100Mbps

On-Board Cache: 16MB

Bays/Ports/Slots: 24

Voltage: 110-240V Multi

Cisco SLM224GT-NA Catalyst SF200-24 24-Port 10/100 & 2 Combo mini-GBIC Switch - Brand New

Cisco SLM224GT-NA Catalyst SF200-24 24-Port Ethernet; 2 Combo mini-GBIC Switch - Brand New

Cisco 200 Series Switches

Build a Powerful, Easy-to-Use Basic Business Network at an Affordable Price
The key to succeeding in today’s competitive business environment is investing resources wisely – knowing how to separate the essential from the extraneous and get the most value for your dollar. As the backbone of your business and productivity applications, the small business network clearly falls into the “essential” category. But that doesn’t mean you need the most advanced feature set on the market.,/p>

With Cisco® 200 Series Smart Switches, you can achieve business-class network security and performance without paying for advanced network management features that you will not need. When you need a reliable solution to share network resources and connect computers, printers, and servers, but low cost is a top priority, Cisco 200 Series Smart Switches provide the ideal solution.

Cisco 200 Series Smart Switches
The Cisco 200 Series (Figure 1) is a series of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Fast Ethernet or Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface, Cisco Discovery Protocol, and Cisco Smartports, you can deploy and configure a rock-solid business network in minutes.

Business Applications
Whether you need basic high-speed connectivity for your computers and servers or a comprehensive voice, data, and wireless technology solution, Cisco 200 Series switches can meet your business needs. Possible deployment scenarios include:

  • High-speed desktop connectivity - Cisco 200 Series switches can quickly and securely connect employees working in small offices with one another and with all of the servers, printers, and other devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network uptime, and keep your employees connected and productive.
  • Highly secure wireless connectivity - Cisco 200 Series switches work with Cisco and third-party wireless solutions to extend the reach of your network. Employees can work productively from conference rooms and common areas, collaborate in any office, and access business applications from wherever they are. With their security features, Power over Ethernet (PoE), Auto Smartports, VLAN, and QoS, these switches are the perfect foundation to add business-grade wireless to a network.
  • Unified communications - The Cisco 200 Series provides QoS features to enable you to prioritize delay-sensitive traffic in your network and let you converge all of your communications solutions – such as IP telephony and video surveillance – onto a single Ethernet network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses, and Cisco 200 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.

Features and Benefits
Cisco 200 Series Smart Switches provide all of the features you need to create a basic business-class network at an affordable price. These features include:

  • Easy configuration and management: Cisco 200 Series switches are designed to be easy to deploy and use by small businesses or the partners that serve them. Simple-to-use web-based interfaces reduce the time it takes to deploy, manage, and troubleshoot your network. Key features include:
    • Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP-MED) automatically detect all the devices connected to your network and then automatically configure themselves for the appropriate connectivity and instruct the devices to use appropriate voice VLAN or QoS parameters.
    • Cisco Smartports technology provides for more advanced capabilities and hands-on control by automatically configuring ports with specific levels of security, QoS, and availability according to the type of connected device, based on Cisco best practices and pretested configurations. The Auto Smartports feature automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This capability facilitates zero touch deployments.
    • Cisco FindIT Network Discovery Utility works through a simple toolbar on the user’s web browser to discover Cisco devices on the network and display basic information, such as serial numbers and IP addresses, to aid in the configuration and speed the deployment of Cisco Small Business products.
  • Performance and reliability: Cisco 200 Series switches have been tested to deliver the high availability and performance you would expect from a Cisco switch and help you prevent costly downtime. The switches speed file transfer times, improve slow and sluggish networks, keep your vital business applications available, and help your employees respond more quickly to customers and each other. With a network based on Cisco 200 Series switches, you can address all of your business communications and connectivity needs and reduce the total cost of ownership of your technology infrastructure.
  • Power over Ethernet (PoE): Cisco 200 Series switches are available with PoE on both Fast Ethernet and Gigabit Ethernet models. This capability simplifies the deployment of IP telephony, wireless, video surveillance, and other solutions by allowing you to send data and power to network endpoints over the same network cable. With no need for separate power supplies or outlets for IP phones, IP cameras, or wireless access points, you can speed up deployment and installation and take advantage of advanced communications technologies quickly, and at a lower cost.
  • Network security: Cisco 200 Series switches provide security and network management features you need to maintain a high level of security for your business, keep unauthorized users off the network, and protect your business data. The switches provide integrated network security to reduce the risk of a security breach, with IEEE 802.1X port security to control access to your network. Denial-of-service (DOS) attack prevention increases network uptime in the presence of an attack.
  • IP telephony support: Cisco 200 Series switches include QoS features to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services.
  • Network wide automatic voice deployment: Using a combination of Cisco Discovery Protocol, LLDP-MED, Auto Smartports, and Voice Services Discovery Protocol (VSDP) – a unique patent-pending Cisco protocol – customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge into a single voice VLAN and set of QoS parameters and then propagate them out to the phones on the ports where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.
  • IPv6 support: As the IP network addressing scheme evolves to accommodate more devices, you can make sure that your network is ready. Cisco 200 Series switches provide native support for IPv6 alongside traditional IPv4. That means you can take full advantage of IPv6-enabled operating systems and applications in the future, without having to upgrade your network equipment.
  • An energy-efficient solution: Cisco 200 Series switches are designed to be energy efficient and eco-friendly without compromising performance. They help conserve energy by optimizing power use, which helps protect the environment and lowers your energy costs. Power-saving features include:
    • Energy-Efficient Ethernet (EEE, the IEEE 802.3az standard), supported on Cisco 200 Series Gigabit Ethernet switch models. EEE improves the efficiency of network equipment and provides standardized signaling mechanisms that can enable rapid transitions between normal operation and low power idle (LPI) states in systems on either end of the physical layer link.
    • Automatic power down on Gigabit Ethernet ports when a link is not active.
    • Embedded intelligence to adjust power based on cable length on Gigabit Ethernet models.
    • Fanless design in most models, which reduces power consumption, increases reliability, and provides quieter operation.
  • Additional Gigabit Ethernet ports: The Cisco 200 Series provides more ports per switch than other switches in the market, giving you more flexibility to connect and empower your business. Gigabit Ethernet models feature 26- and 50-port switches, versus traditional devices that offer 20 or 44 ports with 4 shared ports. The Cisco 200 Series also offers mini Gigabit Interface Converter (mini-GBIC) expansion slots that give you the option to add fiber optic or Gigabit Ethernet uplink connectivity to the switch. With the ability to increase the connectivity range of the switches, you have more flexibility to design your network around your unique business environment, and to easily connect switches on different floors or across the business.

Cisco 200 Series Switches
Model NumberSLM224GT-NA
Performance
ModelSF200-24
Capacity in Millions of Packets per Second (mpps) (64-byte packets)6.55
Switching Capacity in Gigabits per Second (Gbps)8.8
Layer 2 Switching
Spanning Tree Protocol (STP)Standard 802.1d STP support

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port groupingSupport for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • Up to 4 groups
  • Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
  • VLANSupport for up to 256 VLANs simultaneously (out of 4096 VLAN IDs). 16 VLANs supported in SG200-08 and SG200-08P

    Port-based and 802.1Q tag-based VLANs
    Voice VLANVoice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
    Internet Group Management Protocol (IGMP) versions 1 and 2 snoopingIGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (16 for SG200-08 and SG200-08P)
    Head-of-line (HOL) blockingHOL blocking prevention
    Security
    IEEE 802.1X (Authenticator role)802.1X: RADIUS authentication, MD5 hash
    Port securityLocks MAC addresses to ports, and limits the number of learned MAC addresses
    Storm controlBroadcast, multicast, and unknown unicast
    DoS preventionDoS attack prevention
    Quality of Service
    Priority levels4 hardware queues
    SchedulingStrict priority and weighted round-robin (WRR)

    Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
    Class of servicePort based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
    Rate limitingIngress policer, per VLAN and per port
    Standatds
    StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 2618
    IPv6
    IPv6
  • IPv6 host mode
  • IPv6 over Ethernet
  • Dual IPv6/IPv4 stack
  • IPv6 neighbor and router discovery (ND)
  • IPv6 stateless address auto-configuration
  • Path maximum transmission unit (MTU) discovery
  • Duplicate address detection (DAD)
  • Internet Control Message Protocol (ICMP) version 6
  • IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) support
  • IPv6 QosPrioritize IPv6 packets in hardware
    Multicast Listener Discovery (MLD) snoopingDeliver IPv6 multicast packets only to the required receivers
    IPv6 applicationsWeb, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client
    IPv6 RFCs supported
  • RFC 2463: ICMP version 6
  • RFC 3513: IPv6 address architecture
  • RFC 4291: IPv6 addressing architecture
  • RFC 2460: IPv6 specification
  • RFC 2461: Neighbor discovery for IPv6
  • RFC 2462: IPv6 stateless address auto-configuration
  • RFC 1981: Path maximum transmission unit (MTU) discovery
  • RFC 4007: IPv6 scoped address architecture
  • RFC 3484: Default address selection mechanism
  • RFC 4214: ISATAP tunneling
  • RFC 4293: MIB IPv6: Textual conventions and general group
  • RFC 3595: Textual conventions for IPv6 flow label
  • Management
    Web user interfaceBuilt-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring
    Simple Network Management Protocol (SNMP)SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM)

    Not supported on SG200-08 and SG200-08P
    Standard MIBs (Not supported on SG200‑08 and SG200-08P)
  • draft-ietf-bridge-8021x-MIB
  • draft-ietf-bridge-rstpmib-04-MIB
  • draft-ietf-hubmib-etherif-MIB-v3-00-MIB
  • draft-ietf-syslog-device-MIB
  • ianaaddrfamnumbers-MIB
  • ianaifty-MIB
  • ianaprot-MIB
  • inet-address-MIB
  • ip-forward-MIB
  • ip-MIB
  • RFC1155-SMI
  • RFC1213-MIB
  • SNMPv2-MIB
  • SNMPv2-SMI
  • SNMPv2-TM
  • RMON-MIB.my
  • dcb-raj-DCBX-MIB-1108-MIB
  • rfc1724-MIB
  • RFC-1212.my_for_MG-Soft
  • rfc1213-MIB
  • rfc1757-MIB
  • RFC-1215.my
  • SNMPv2-CONF.my
  • SNMPv2-TC.my
  • rfc2674-MIB
  • rfc2575-MIB
  • rfc2573-MIB
  • rfc2233-MIB
  • rfc2013-MIB
  • rfc2012-MIB
  • rfc2011-MIB
  • draft-ietf-entmib-sensor-MIB
  • lldp-MIB
  • lldpextdot1-MIB
  • lldpextdot3-MIB
  • lldpextmed-MIB
  • p-bridge-MIB
  • q-bridge-MIB
  • rfc1389-MIB
  • rfc1493-MIB
  • rfc1611-MIB
  • rfc1612-MIB
  • rfc1850-MIB
  • rfc1907-MIB
  • rfc2571-MIB
  • rfc2572-MIB
  • rfc2574-MIB
  • rfc2576-MIB
  • rfc2613-MIB
  • rfc2665-MIB
  • rfc2668-MIB
  • rfc2737-MIB
  • rfc2925-MIB
  • rfc3621-MIB
  • rfc4668-MIB
  • rfc4670-MIB
  • trunk-MIB
  • tunnel-MIB
  • udp-MIB
  • Private MIBs (Not supported on SG200‑08 and SG200-08P)
  • CISCOSB-lldp-MIB
  • CISCOSB-brgmulticast-MIB
  • CISCOSB-bridgemibobjects-MIB
  • CISCOSB-bonjour-MIB
  • CISCOSB-dhcpcl-MIB
  • CISCOSB-MIB
  • CISCOSB-wrandomtaildrop-MIB
  • CISCOSB-traceroute-MIB
  • CISCOSB-telnet-MIB
  • CISCOSB-stormctrl-MIB
  • CISCOSB-ssh-MIB
  • CISCOSB-socket-MIB
  • CISCOSB-sntp-MIB
  • CISCOSB-smon-MIB
  • CISCOSB-phy-MIB
  • CISCOSB-multisessionterminal-MIB
  • CISCOSB-mri-MIB
  • CISCOSB-jumboframes-MIB
  • CISCOSB-gvrp-MIB
  • CISCOSB-endofmib-MIB
  • CISCOSB-dot1x-MIB
  • CISCOSB-deviceparams-MIB
  • CISCOSB-cli-MIB
  • CISCOSB-cdb-MIB
  • CISCOSB-brgmacswitch-MIB
  • CISCOSB-3sw2swtables-MIB
  • CISCOSB-smartPorts-MIB
  • CISCOSB-tbi-MIB
  • CISCOSB-macbaseprio-MIB
  • CISCOSB-policy-MIB
  • CISCOSB-env_mib
  • CISCOSB-sensor-MIB
  • CISCOSB-aaa-MIB
  • CISCOSB-application-MIB
  • CISCOSB-bridgesecurity-MIB
  • CISCOSB-copy-MIB
  • CISCOSB-CpuCounters-MIB
  • CISCOSB-Custom1BonjourService-MIB
  • CISCOSB-dhcp-MIB
  • CISCOSB-dlf-MIB
  • CISCOSB-dnscl-MIB
  • CISCOSB-embweb-MIB
  • CISCOSB-fft-MIB
  • CISCOSB-file-MIB
  • CISCOSB-greeneth-MIB
  • CISCOSB-interfaces-MIB
  • CISCOSB-interfaces_recovery-MIB
  • CISCOSB-ip-MIB CISCOSB-iprouter-MIB
  • CISCOSB-ipv6-MIB
  • CISCOSB-mnginf-MIB
  • CISCOSB-lcli-MIB
  • CISCOSB-localization-MIB
  • CISCOSB-mcmngr-MIB
  • CISCOSB-mng-MIB
  • CISCOSB-physdescription-MIB
  • CISCOSB-Poe-MIB
  • CISCOSB-protectedport-MIB
  • CISCOSB-rmon-MIB
  • CISCOSB-rs232-MIB
  • CISCOSB-SecuritySuite-MIB
  • CISCOSB-snmp-MIB
  • CISCOSB-specialbpdu-MIB
  • CISCOSB-banner-MIB
  • CISCOSB-syslog-MIB
  • CISCOSB-TcpSession-MIB
  • CISCOSB-traps-MIB
  • CISCOSB-trunk-MIB
  • CISCOSB-tuning-MIB
  • CISCOSB-tunnel-MIB
  • CISCOSB-udp-MIB
  • CISCOSB-vlan-MIB
  • CISCOSB-ipstdacl-MIB
  • CISCO-SMI-MIB
  • CISCOSB-DebugCapabilities-MIB
  • CISCOSB-CDP-MIB
  • CISCOSB-vlanVoice-MIB
  • CISCOSB-EVENTS-MIB
  • CISCOSB-sysmng-MIB
  • CISCOSB-sct-MIB
  • CISCO-TC-MIB
  • CISCO-VTP-MIB
  • CISCO-CDP-MIB
  • CISCOSB-eee-MIB
  • CISCOSB-ssl-MIB
  • CISCOSB-qosclimib-MIB
  • CISCOSB-digitalkeymanage-MIB
  • CISCOSB-tbp-MIB
  • CISCOSMB-MIB
  • CISCOSB-secsd-MIB
  • CISCOSB-draft-ietf-entmib-sensor-MIB
  • CISCOSB-draft-ietf-syslog-device-MIB
  • CISCOSB-rfc2925-MIB
  • Remote Monitoring (RMON)Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
    IPv4 and IPv6 dual stackCoexistence of both protocol stacks to ease migration
    Firmware upgradeWeb browser upgrade (HTTP) and TFTP
    Port mirroringTraffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported.
    VLAN mirroringTraffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported.
    Dynamic Host Configuration Protocol (DHCP) (options 66 and 67)(DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address and perform auto-configuration (with configuration file download)
    Text-editable config filesConfig files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
    SmartportsSimplified configuration of QoS and security capabilities

    Not supported on SG200-08 and SG200-08P
    Auto SmartportsAutomatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments.

    Not supported on SG200-08 and SG200-08P
    Cloud servicesSupport for FindIT Network Discovery Utility and Cisco Active Advisor
    LocalizationLocalization of GUI and documentation into multiple languages
    Other managementHTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog
    Power Efficiency
    EEE compliant (802.3az)Supports 802.3az on all copper Gigabit Ethernet ports (SG200-xx models)

    Not supported on SG200-08 and SG200-08P
    Energy Detect modeAutomatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down

    Active mode is resumed without loss of any packets when the switch detects that the link is back up
    Cable length detectionAdjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m.

    Not supported on SG200-08 and SG200-08P
    General
    Jumbo framesFrame sizes up to 10 KB supported on 10/100 and Gigabit Ethernet interfaces (9 KB for SG200-08 and SG200-08P)
    MAC tableUp to 8,000 MAC addresses
    Discovery
    Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP‑MED extensionsLLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.
    Cisco Discovery ProtocolThe switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via this protocol.

    Not supported on SG200-08 and SG200-08P
    Auto SmartportsAutomatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This capability facilitates zero-touch deployments.

    Not supported on SG200-08 and SG200-08P
    BonjourThe switch advertises itself using the Bonjour protocol
    Power over Ethernet (PoE)
    IEEE 802.3af PoE Powered Device (PD)Besides AC power, SG200-08 can work as PoE powered device (PD) and be powered by PoE switch connected to port 1. When both AC and PoE power are connected, PoE is preferred over AC, and AC will function as the backup to PoE power source.
    Power Savings ModeEnergy Detect
    Power Consumption: Worst Case110V/0.272A/13.7W 220V/0.169A/14.5W
    Heat Dissipation (BTU/hr)49.5
    Capacity in Millions of Packets per Second (mpps) (64-byte packets)6.55
    Total System Ports24 Fast Ethernet
    2 Gigabit Ethernet
    RJ-45 Ports24 Fast Ethernet
    Combo Ports (RJ-45 + SFP)2 Gigabit Ethernet combo
    ButtonsReset buton
    Cabling typeUnshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T
    LEDsSystem, Link/Act, PoE, Speed
    Flash16 MB (8 MB in SG200-08 and SG200-08P)
    CPU memory128 MB (32 MB in SG200-08 and SG200-08P)
    Packet Buffer8 Mb
    All numbers are aggregate across all ports, as the buffers are dynamically shared:
    Environmental
    Dimensions (W x H x D)d>Metric (mm): 440 x 44.32 x 257

    Inches: 17.35 x 1.74 x 10.1
    Unit weightKilograms: 3.04
    Pounds: 6.70
    Power100V-240V, 50-60 HZ, internal, universal
    Capacity in Millions of Packets per Second (mpps) (64-byte packets)6.55
    CertificationUL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
    Operating temperature10% to 90%, relative, noncondensing
    Capacity in Millions of Packets per Second (mpps) (64-byte packets)6.55
    Storage humidity10% to 90%, relative, noncondensing
    Acoustic noise and mean time between failures (MTBF)
    Fan (Number)No
    Acoustic Noise ----
    MTBF @ 40°C (hours)414,166
    Package Content
  • Cisco 200 Series Smart Switch
  • Power cord (power adapter for 8-port and 10-port SKUs)
  • Mounting hardware
  • Quick-start guide
  • Minimum Requirements
  • Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome
  • Category 5 Ethernet network cable
  • TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
  • Fast Ethernet
    Product Ordering NumberSLM224GT-xx
    Description
  • 24 10/100 ports
  • 2 combo mini-GBIC ports

  • Click here to view the manufacturer's item description/brochure

    ROHS Compliant

    Alternate MPNs: SF200-24

    Weight: 7 lb

    Warranty: Factory Warranty

    Brand New

    Condition Levels Explained

    The product is brand new.

    Factory Warranty Warranty