Western Digital Part #/MPN: 213228-001
DiscTech Item #: CPQ-213228-001-RF-OE
- RefurbishedCondition Levels Explained
These products have had NO problems or failures, they merely have some usage. The product has been professionally returned to excellent condition. These items have been fully tested, formatted (if appropriate) &repackaged. Hard drives are fully vetted for surface defects and wear, only healthy disks are approved for resale to our customers. Please see our refurbishing process for more details. Watch a video about our refurbishing process
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Special Order - Ships in 5-10 business daysSpecial Order - Ships in 5-10 business days
This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
Capacity: 10GB
Speed: 7,200RPM
Interface Types: IDE ATA 3.5in
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 244/400
Average Seek Time: 8.9/10.9
Electrical Interface: EIDE Ultra ATA100 100MBps
On-Board Cache: 2MB
Compaq 213228-001 100MBps 7200 RPM IDE Ultra ATA Hard Disk Drive
Alt Model Number: WD100BB
This products is not currently being manufactured by Western Digital, but some may still be commercially available through a variety of sources.
Compatibility:
This drive is compatible with any server that accepts 3.5inch x 1inch (LFF) 40-pin EIDE hard drives.
Specifications | |
---|---|
Model Number | 213228-001 |
Alt Model Number | WD100BB |
Recommended Setup Parameters | |
Cylinders | 16383 |
Heads | 16 |
Sectors / Track | 63 |
Landing Zone | 16383 |
WPC | 16383 |
Jumper Setting Information | Ten Pin Drive |
Physical Specifications | |
Formatted Capacity | 10,005 MB / 10GB |
Interface | 40-pin EIDE |
Actuator Type | Rorary Voice Coil |
Number of Platters | 1 |
Data Surfaces | 1 |
Number of Heads | 1 |
Bytes Per Sector | 512 |
User Sectors Per Drive | 19,541,088 |
Servo Type | Embedded |
Recording Method | Rate 16/17 PRML |
ECC | Reed Solomon |
Head Park | Automatic |
Performance Specifications | |
Average Seek (Read) | 8.9 ms (typical), 18 ms (maximum) |
Average Seek (Write) | 10.9 ms (typical), 20 ms (maximum) |
Track to Track Seek | 2.0 ms (typical), 5 ms (maximum) |
Full Stroke Seek | 21 ms (typical), 28 ms (maximum) |
Index Pulse Period | 8.3 (nominal) |
Average Latency | 4.2 ms (nominal) |
Rotational Speed | 7200 RPM (nominal) |
Controller Overhead | 0.3 ms average |
Transfer Rate (Buffer to Host) | 100 MB/s (Mode 5 Ultra ATA) 66.6 MB/s (Mode 4 Ultra ATA) 33.3 MB/s (Mode 2 Ultra ATA) 16.6 MB/s (Mode 4 PIO) 16.6 MB/s (Mode 2 multi-word DMA) |
Transfer Rate (Buffer to Disk) | 244 Mbits/s minimum 400 Mbits/s maximum |
Interleave | 1:1 |
Buffer Size | 2 MB |
Error Rate (Non-Recoverable) | <1 in 10E14 bits read |
Spindle Start Time - From Power-on to Drive Ready | 4.5s typical, 7s maximum |
Contact Start/Stop Cycles (CSS) | 40,000 minimum |
Physical Dimensions | |
Height | 1.028 inch / 26.1 mm |
Length | 5.787 inches / 147.0 mm |
Width | 4.00 inches / 101.6 mm |
Weight | 1.4 lbs / 0.62 kg |
Click here to view the manufacturer's item description/brochure
Alternate MPNs: WD100BB
Weight: 2.5 lb
Warranty: 1 Year DiscTech
Refurbished
These products have had NO problems or failures, they merely have some usage. The product has been professionally returned to excellent condition. These items have been fully tested, formatted (if appropriate) &repackaged. Hard drives are fully vetted for surface defects and wear, only healthy disks are approved for resale to our customers. Please see our refurbishing process for more details. Watch a video about our refurbishing process
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty