Dell Part #/MPN: 3DJRJ
DiscTech Item #: DEL-3DJRJ-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: SAS Serial Attached SCSI, Ethernet RJ45, SFF-8088
Electrical Interface: SAS-2 Serial Attached SCSI v2 - 6.0Gbps
Dell 3DJRJ 6Gb/s SAS EMM module for the Powervault MD1200 / MD1220 - New Pull
The Dell 3DJRJ is a replacement or add on Dual-Port / Single Host Non-RAID controller module for the Dell PowerVault MD1200, MD1220 storage array.
Hot swappable Single Host EMM controller module for Dell Powervault MD1200, MD1220 Storage Arrays. The Dell MD1200 / MD1220 will support up to 2 units of this 3DJRJ controller / EMM module.
Ports: 1 x SFF8088 IN, 1 x SFF8088 OUT, Ethernet Mgmt Port, 6pin maintenance port.
DPN: 3DJRJ / 03DJRJ
Compatibility:
Dell PowerVault MD1200 / MD1220
Hot swappable Single Host EMM controller module for Dell Powervault MD1200, MD1220 Storage Arrays. The Dell MD1200 / MD1220 will support up to 2 units of this 3DJRJ controller / EMM module.
Ports: 1 x SFF8088 IN, 1 x SFF8088 OUT, Ethernet Mgmt Port, 6pin maintenance port.
DPN: 3DJRJ / 03DJRJ
Click here to view the manufacturer's item description/brochure
Alternate MPNs: 03DJRJ
Weight: 4 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty