Seagate Part #/MPN: ST9500420AS
DiscTech Item #: SGT-ST9500420AS-NP-OE-DEL
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 500GB
Speed: 7,200RPM
Interface Types: SATA
Form Factor: 2.5inx9mm Fits Most laptops
Sector Size: 512 / 512e
Average Seek Time: 11 / 13
Electrical Interface: SATA 300 - 3.0Gbps
On-Board Cache: 16MB
Dell 8PDNC / Seagate Momentus ST9500420AS 7200.4 500GB 7.2K 2.5-inch SATA Hard Drive - New Pull OEM
The Seagate® Momentus® 7200.4 drive delivers the highest available capacity and performance in a laptop hard drive and draw only .05 percent more power than a 5400-RPM laptop drive.
Key Advantages
- Highest available notebook
- 500-GB capacity
- Native Command Queuing
- Green features:
- Lowest-power 7200-RPM laptop hard drive yet
- Ramp load features improve idle power consumption
- State-of-the-art error-correction
- Fluid dynamic bearing motor
- Support for S.M.A.R.T. drive monitoring and reporting
- Support for Read Multiple and Write Multiple commands
| General | |
| Manufacturer | Seagate Technology |
| Model | 7200.4 |
| Product Line | Seagate Momentus |
| Environmental Parameters | |
| Max Operating Temperature | 60 °C |
| Min Operating Temperature | 0 °C |
| Shock Tolerance Operating | 350 G @ 2 ms |
| Shock Tolerance Storage | 1000 G @ 1 ms |
| Interface | |
| Connector Type | 7 pin Serial ATA |
| Interface (Storage) | Serial ATA-300 |
| Drive Performance | |
| Average Latency | 4.17 ms |
| Average Seek Time | 11 ms |
| Buffer Size | 16 MB |
| Capacity | 500 GB |
| Data Transfer Rate | 300 MBps |
| Form Factor | 2.5 x .374 |
| Hard Drive Type | Internal hard drive |
| Interface Type | Serial ATA-300 |
| Non-Recoverable Errors | 1 per 10^14 |
| Spindle Speed | 7200 rpm |
| Dimensions & Weight | |
| Depth | 3.945 in |
| Height | .374 in |
| Weight | .238 lbs |
| Width | 2.75 in |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Alternate MPNs: 8PDNC 08PDNC
Weight: 0.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty