SAMSUNG Part #/MPN: MZILS480HEGR0D3
DiscTech Item #: SAM-MZILS480HEGR0D3-NP-OE-DEL
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 480GB
Speed: Solid State Memory
Interface Types: SAS Serial Attached SCSI
Form Factor: 2.5inx15mm SFF Server Drive
Sector Size: 512 / 512e
Electrical Interface: SAS-3 Serial Attached SCSI v3 - 12.0Gbps
SSD Type: TLC
SSD Endurance DWPD: Enterprise Read Intensive
- Ultra-High Capacity SAS SSD
- High Speed with Low Latency
- Reliable Storage, 24/7 Operation
- Top Solution for Diverse Applications
- Best Solution for Heavy Demands
Alt MPN: MZ-ILS480B 8Y64H 08Y64H
PM1633a 2.5” SAS SSD Samsung PM1633a solid-state drive offers up to 1,000 times the performance of 15K RPM hard disk drives at a comparable cost per gigabyte.
Samsung PM1633a SAS SSD delivers:
Consistently High Performance – Up to 1,000 times the performance of the fastest 15K RPM hard drives, the Samsung PM1633a SAS SSD provides enterprise IT administrators performance to spare. An optimized Samsung native SAS 3.0 controller supplies the drive with 12 Gb/s of bandwidth and provides enterprises the performance margin to prevent costly and disruptive application support tickets. Exceptional Value – The same low cost per gigabyte as slower SAS HDDs. By utilizing Samsung state-of-the-art 3D V-NAND flash memory, cost effective TLC flash memory can address high-end enterprise applications, outperforming older planar MLC flash memory, and providing solid state performance and reliability at hard drive cost. With no moving parts, the PM1633a SAS SSD delivers over 10 times the reliability of spinning disks, reducing the administrative cost overhead associated with drive replacement. Breakthrough Storage Density – Capacities up to 16TB in a 2.5” small form factor (SFF) drive. With 60% higher capacity per drive, and a smaller 2.5” form factor, up to 384TB can be stored in a 2U server. This breakthrough in storage density more than triples the density available with high capacity HDDs, using an industry standard form factor, and without sacrificing enterprise reliability, availability, and serviceability (RAS). DP/N: 8Y64H 08Y64H
Model | PM1633a |
F/F | 2.5 inch |
Seq. Read | 1250 MB/s |
Ran. Read | 200 KIOPS |
DWPD | 1 DWPD |
Interface | SAS 12.0 Gbps |
Capacity | 480 GB |
Seq. Write | 600 MB/s |
Ran. Write | 20 KIOPS |
Alternate MPNs: 8Y64H 08Y64H
Weight: 1 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty