Dell Part #/MPN: CC852
DiscTech Item #: DEL-CC852-UP-OE
- Used PullCondition Levels Explained
The product has been removed from a working system (e.g. server). These products vary in their usage due to age of system & type of service etc.. However, Used System Pulls are fully tested and all handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- In Stock:9Need more?Stock Levels
This stock level is real time and accurate. This quantity is available for same-day shipment. Larger quantities can take up to a week to ship. Call us for larger quantities that you need urgently.
Interface Types: SAS Serial Attached SCSI, SATA, SATA 1.8in Micro for ultra mobile applications
Form Factor: 3.5inx1.0in LFF Hard Drive
Compatible Systems: Dell 10th Gen. 2950 / 6950
Dell (Original) CC852 / D962C caddy / trayfor mounting SATAu / SATA u 3.5" drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.
Used Pull Dell Original with screws
NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required
NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray
Dell (Original) CC852 / D962C tray / caddy for mounting SATAu / SATA u 3.5" drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.
Used Pull Dell Original with screws
NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required
NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray
Compatibility:
Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.
Used Pull Dell Original with screws
This tray will accept any 3.5" x 1.0" SATA /SATAu hard drive that has standard SATA 1.5Gbps or 3.0Gbps interface.
Click here to view the manufacturer's item description/brochure
Alternate MPNs: D962C 0D962C 0CC852
Weight: 0.5 lb
Warranty: 1 Year DiscTech
Used Pull
The product has been removed from a working system (e.g. server). These products vary in their usage due to age of system & type of service etc.. However, Used System Pulls are fully tested and all handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty