• Home
  • ›
  • Dell 20TB SAS HDD MTTCF Western Digital WUH722420AL5200 0F64608B 3.5" 6Gbps 7.2K RPM 512e Enterprise Hard Drive

Dell 20TB SAS HDD MTTCF Western Digital WUH722420AL5200 0F64608B 3.5" 6Gbps 7.2K RPM 512e Enterprise Hard Drive

$1,499.00

Capacity:20TB
Speed:7.2K RPM
Interface Types:SAS
Form Factor:3.5" LFF Hard Drive
Electrical Interface:SAS-3 12Gbps
RAM:512MB
Click to see more 20TB SAS 7.2K RPM Drives

Description

Dell MTTCF Western Digital WUH722420AL5200 0F64608 20TB 3.5in 6Gbps 7.2K RPM 512e Enterprise SAS Hard Drive HDD - Brand New

Dell MTTCF Western Digital WUH722420AL5200 0F64608 20TB 3.5" 6Gbps 7.2K RPM 512e Enterprise SAS Hard Drive HDD - Brand New

20TB to Fuel Data Center Expansion
The explosive growth of data from AI/ML, 5G networks, IoT, connected vehicles, and
more is fueling growth in data centers. HDD innovation drives the ability to capture,
store, analyze, and protect much of this data. Higher-capacity HDDs deliver higher data
density, enabling data center expansion and efficiency.
The Ultrastar® DC HC580 20TB data center HDD with OptiNAND™ technology is the next leap in data density., providing smaller footprint- in power-constrained environments.
The Ultrastar DC HC580 combines several industry-first technologies on a 10-disk CMR drive, delivering the performance, quality, and reliability that data center customers require.


Low Power for Lower Operating Costs
Innovative technologies such as OptiNAND energy-assisted magnetic recording (EAMR), triple-stage actuator (TSA), and HelioSeal enable high capacity with low power

OptiNAND Technology Benefits
The Ultrastar DC HC580 is the newest-generation platform with OptiNAND technology, which integrates an iNAND® Universal Flash Storage (UFS) Embedded Flash Drive (EFD), with traditional spinning disk media. Western Digital’s new 2.4TB/disk CMR areal density is used with its proven 10-disk platform, delivering up to 24TB1 capacity with a CMR recording format. More disks and high areal density work together to maximize data storage efficiency. OptiNAND improves drive resiliency in the event of an emergency power off (EPO) by increasing the amount of non-volatile memory (NVM) available to flush critical metadata to the iNAND. ArmorCache enabled by OptiNAND technology ensures that all the data in the DRAM cache is safely written to the onboard NVM device, should a sudden power loss event occur. Power to a host system may be lost without warning; operating HDD’s with write cache disabled (WCD) reduced the risk of data loss. With ArmorCache technology, host flush cache commands are no longer necessary to protect data, allowing for maximum performance in either WCD or write cache enabled (WCE) mode. This innovative feature provides enterprise power loss protection of data in WCE while increasing performance in WCD mode.

Trusted Reliability and Quality for Data at Scale
The Ultrastar DC HC580 meets modern data center reliability requirements with 2.5M MTBF2 (projected) and a 5-year limited warranty. It is performance-optimized for heavy application workloads and designed to handle workloads of up to 550TB per year. IT professionals and executives trust Western Digital and the Ultrastar DC HC580 hard drive to deliver unbeaten CM capacity and great value for their data center.

Compatibility

This drive is compatible with any server or workstation that accepts 3.5inx1.0in LFF 20TB SAS Hard Drives

Specifications

HGST Ultrastar DC HC580
3.5-Inch Enterprise Hard Disk Drive
HGST Part No.0F64608
HGST Model No.WUH722420AL5200
Data Security ModeSecure Erase
InterfaceSAS 12Gb/s
Capacity20TB / 20000GB
Form Factor3.5inch
Sector Size (bytes)512e: 512
Max. areal density (Gbits/sq. in., max)1109
Data buffer (MB)512
Rotational speed (RPM)7200
Latency average (ms)4.16
Interface transfer rate (MB/s, max)600
Sustained transfer rate R/W
(MiB/sec, typ.)
(MB/sec, typ.)

Up to 291
Up to 277
Form FactorLFF
Error Rate in bits read1 in 10^15
Load/Unload cycles (at 40°C)600,000
MTBF2.5M hours
Annual failure rate (AFR)0.35%
Availability (hrs/day x days/wk)24x7
Idle/Operating (Bels, typical)2.0 / 3.2
Requirement+5V, +12V
Operating (W, typical)8.4
Idle(W)5.5
z-height (mm, max)26.1
Dimensions (width x depth, mm)101.6 (+/-0.25) x 147
Weight(g, max)670
Ambient Temperature5°C to 60°C
Shock (half-sign wave, 2 ms, G)40
Vibration (G RMS, 5 to 500 Hz)0.7
Ambient Temperature-40°C to 70°C
Shock (half-sign wave, 2 ms, G)200
Vibration (G RMS, 2 to 200 Hz)1.04

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Alternate MPNs: MTTCF 0MTTCF

Weight: 1.8 lb

Warranty: 1 Year DiscTech

Condition

Warranty

1 Year DiscTech Warranty

4.7 Overall6966 Reviews