Dell Powervault 200S SCSI Storage Array

Dell Part #/MPN: 200S

DiscTech Item #: DEL-PV200S-UP-OE

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.


Interface Types: SCSI 80pin SCA-2 Hot-Swap, SCSI 68pin HD68

Form Factor: 3.5inx1.0in LFF Hard Drive

Electrical Interface: SCSI LVD U320 - 320MBps 16-bit

Bays/Ports/Slots: 8

U Height: 3U

Wattage/VA: 600W

Voltage: 110-240V Multi

Dell Powervault 200S SCSI Storage Array - 8 Bays, 3 Fans, Dual Power Supplies, Dual Controller Cards - Used

Dell PowerVault systems are reliable, flexible, external SCSI expansion enclosures designed to support multiple Dell storage environments and RAID configurations. Each system offers maximized drive-spindle count, hot-plug hard drives, optional redundant power, redundant cooling, rackmount capability, systems management features, and a modular design for easy upgrades. Most major components, including hard drives and power supply/cooling modules are hot-pluggable and can be removed and replaced easily. This means they can be removed or inserted while the power is on, but all I/O activity has ceased.


SCSI hard drives

support for up to eight 1-inch-by-3.5-inch OR 1.6-inch-by-3.5-inch LVD Ultra 160 and Ultra 320 hot-plug hard drives, at speeds of 10K or 15K rpm.

External Ports

68-pin connector in a nonredundant configuration, and two
68-pin connectors in a redundant configuration (or Ultra2/Ultra3
cluster mode for ESEM and SEMM)

Backplane Board Connectors

Hard drives

eight 80-pin SCA-2 connectors

Power supply/cooling module

2 high-current connectors

Enclosure management modules (EMM)

210-pin connector

Split-bus module

180-pin connector

Power Supplies


340/460 W peak

Heat dissipation

990 BTUs (nominal)


90 to 135 V at 60 Hz; 180 to 265 V at 50 Hz



13.3 cm (5.25 inches)


44.6 cm (17.55 inches)


43.2 cm (17.0 inches)


34.0 kg (75.0 lb) maximum with all components installed






10° to 35°C (50° to 95°F)

-40° to 65°C (-40° to 149°F)

Relative humidity




8% to 80% (noncondensing)

8% to 95% (noncondensing)




-16 to 3048 m (-50 to 10,000 ft)

Click here to view the manufacturer's item description/brochure

Weight: 40 lb

Warranty: 1 Year DiscTech

Used Pull

Condition Levels Explained

The product has been removed from a working system (e.g. server). These products vary in their usage due to age of system & type of service etc.. However, Used System Pulls are fully tested and all handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty