Dell Powervault MD3000i iSCSI 2 port RAID controller Module X2R63

Dell Part #/MPN: X2R63

DiscTech Item #: DEL-X2R63-NP-OE

$1,499.00
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back
$1,499.00

Capacity: 2TB

Interface Types: SAS Serial Attached SCSI, SATA, Ethernet RJ45, PS2

Form Factor: 3.5inx1.0in LFF Hard Drive

Electrical Interface: SAS-3 Serial Attached SCSI v3 - 12.0Gbps

On-Board Cache: 512KB

Bays/Ports/Slots: 2

Wattage/VA: 478W

Voltage: 110-240V Multi

Dell Powervault MD3000i iSCSI 2 port EMM RAID controller Module X2R63 / CM669 MW726 / P809D / NY223  - New Pull

Dell Powervault MD3000i iSCSI 2 port EMM RAID controller Module X2R63 / CM669 MW726 / P809D / NY223  - New Pull

Each MD3000i will accept two of these RAID controller modules.

Compatibility: Dell MD3000i

The Dell MD3000i storage enclosure contains two EMM RAID controller modules. Both are hot-pluggable and can be removed and installed independently without shutting down the enclosure.

Dell Enclosure Managment Module with x1 SAS OUT and x1 Ethernet Port, 2x iSCSI ports, PV MD3000 Management port.

Supports Dell original SAS/SATA hard drives up to 2TB per disk.

Alternate MPNs: CM669 MW726 P809D NY223

Weight: 6 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty