Finisar FTLX8571D3BCL / Dell N743D 10Gb/s 850nm Multimode Datacom SFP+ Transceiver

FINISAR Part #/MPN: FTLX8571D3BCL

DiscTech Item #: FIN-FTLX8571D3BCL-BN-OE

$50.00

Brand New
Condition Levels Explained
The product is brand new.
Warranty:1 Year DiscTech
Product Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
Low Stock:Call for ETA
Stock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back

$50.00

Interface Types: SFP

Electrical Interface: Ethernet 10Gigabit - 10Gbps

Voltage: 3.3V

Finisar FTLX8571D3BCL / Dell N743D 10Gb/s 850nm Multimode Datacom SFP+ Transceiver - Brand New

Finisar FTLX8571D3BCL / Dell N743D 10Gb/s 850nm Multimode Datacom SFP+ Transceive - Brand New

Product Features

Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3Vpower supply
Maximum link length of 300m on 2000 MHZ-km MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Operating temperature range: 0°C to 70°C

Applications

10GBASE-SR/SW 10G Ethernet
1200-Mx-SN-I 10G Fibre Channel

Finisar’s FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432 IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF 8472. The FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC and Finisar Application Note AN-2038

Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations. These products are certified by TÜV and CSA to meet the Class 1 eye safety requirements of EN (IEC) 60825 and the electrical safety requirements of EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.

Digital Diagnostic Functions
Finisar FTLX8571D3BCL SFP+ transceivers support the 2-wire serial communication protocol as defined in the SFF-8472. It is very closely related to the E2 PROM defined in the GBIC standard, with the same electrical specifications.

The standard SFP+ serial ID provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information.

Additionally, Finisar SFP transceivers provide a enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.

The SFF-8472 defines a 256-byte memory map in E2 PROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source Agreement. The complete interface is described in Finisar Application Note AN-2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.

The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2 PROM that are not write-protected. The negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.

For more information, please see the SFP MSA documentation and Finisar Application Note AN- 2030.

Please note that evaluation board FDB-1027 is available with Finisar ModDEMO software that allows simple to use communication over the 2-wire serial interface.

Digital Diagnostic Specifications
FTLX8571D3BCL transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Mechanical Specifications
Finisar’s FTLX8571D3BCL SFP+ transceivers are compatible with the SFF-8432 specification for improved pluggable form factor.

Compatibility:

Compatible with SFF-8432 and applicable portions of SFF-8431

10Gb/s 850nm Multimode Datacom SFP+ Transceiver
Model Number	FTLX8571D3BCL
PARAMETER
Maximum Supply Voltage	Symbol: Vcc Min: -0.5 Max: 4.0 Unit: V
Storage Temperature	Symbol: Ts Min: -40 Max: 85 Unit: °C
Case Temperature	Symbol: TA Min: 0 Max: 70 Unit: °C
Relative Humidity	Symbol: RH Min: 0 Max: 85 Unit: % Ref: 1
Supply Voltage	Symbol: Vcc Min: 3.14 Max: 3.46 Unit: V
Supply Current	Symbol: Icc Max: 250 Unit: V
ELECTRICAL TRANSMITTER
Input differential impedance	Symbol: Rin Typ: 100 Unit: Ω Ref: 1
Differential data input swing	Symbol: Vinn,pp Min: 180 Max: 700 Unit: mV
Transmit Disable Voltage	Symbol: VD Min: 2 Max: Vcc Unit: V
Transmit Enable Voltage	Symbol: Ven Min: Vee Max: Vee+0.8 Unit: V
ELECTRICAL RECEIVER
Differential data output swing	Symbol: Vout,pp Min: 300 Max: 850 Unit: mV Ref: 2.6
Data output rise time, fall time	Symbol: tr Min: 28 Unit : ps Ref: 3
LOS Fault	Symbol: V LOS fault Min: 2 Max: VccHOST Unit: V Ref: 4
LOS Normal	Symbol: V LOS norm Min: Vee Max: Vee+0.8 Unit: V Ref: 4
Power Supply Noise Tolerance	Symbol: VccT/VccR Min, Typ, Max: Per SFF-8431 Rev 3.0 Unit: mVpp Ref: 5
OPTICAL TRANSMITTER
Optical Modulation Amplitude (OMA)	Symbol: POMA Typ: -1.5 Unit: dBm Ref: 1
Average Launch Power	Symbol: PAVE Min: -5 Max: -1 Unit: dBm Ref: 2
Optical Wavelength	Symbol: λ Min: 840 Typ: 850 Max: 860 Unit: nm
RMS Spectral Width	Symbol: Δλrms Max: 0.45 Unit: dBm
Optical Extinction Ratio	Symbol: ER Min: 3. Max: 5.5 Unit: dB
Transmitter and Dispersion Penalty	Symbol: TDP Max: 3.9 Unit: dB
Average Launch power of OFF transmitter	Symbol: POFF Max: -30 Unit: dB
Tx Jitter	Symbol: Txj Min, Typ, Max : Per IEEE 802.3ae requirements
Relative Intensity Noise	Symbol: RIN12OMA Max: -128 Unit: dB/Hz
OPTICAL RECEIVER
Receiver Sensitivity (OMA) = 10.3 Gb/s	Symbol: RxSENS1 Max: -11.1 Unit: dBm
Stressed Receiver Sensitivity (OMA) = 10.3 Gb/s	Symbol: RxSENS2 Max: -7.5 Unit: dBm
Receiver OMA Sensitivity = 14.025 Gb/s	Symbol: RxSENS Max: Vee+0.8 Unit: V
Maximum Input Power	Symbol: PMAX Min: +0.5 Unit: dBm
Wavelength Range	Symbol: λC Min: 840 Max: 860 Unit: nm
Receiver Reflectance	Symbol: Rrx Max: 012 Unit: dB
LOS De-Assert	Symbol: LOSD Max: -14 Unit: dBm
LOS Assert	Symbol: LOSA Min: -30 Typ: -23 Unit: dBm
LOS Hysteresis	Min: 0.5 Unit: dB
GENERAL SPECIFICATION
Bit Rate	Symbol: BR Min: 9.95 Max: 10.5 Unit: Gb/sec Ref: 1
Bit Error Ratio	Symbol: BER Max: 10^-12 Ref: 2
Fiber Type 850nm OFL Bandwidth
Maximum support distances Fiber type 62.5µm	160 MHz-km Symbol: Lmax Max: 26 unit: m OM1 200 Mhz-km Symbol: Lmax Max 33 unit: m
Maximum support distances Fiber type 50 µm	400 MHz-km Symbol: Lmax Max: 66 unit: m OM2 500 Mhz-km Symbol: Lmax Max 82 unit: m OM3 2000 Mhz-km Symbol: Lmax Max 82 unit: m
ENVIROMENTAL SPECIFICATION
Case Operating Temperature	Symbol: Top Min: 0 Max: 70 Unit: °C
Storage Temperature	Symbol: Tsto Min: -40 Max: 85 Unit: °C
DIGITAL DIAGNOSTIC ACCURACY
Internally measured transceiver temperature	Symbol: DDTemperature Min: -3 Max: 3 Unit: °C
Internally measured transceiver supply voltage	Symbol: DDVoltage Min: -100 Max: 100 Unit: mV
Measured TX bias current	Symbol: DDBias Min: -10 Max: 10 Unit: % Ref: 1
Measured TX output power	Symbol: DDTx-Power Min: -2 Max: 2 Unit: dB
Measured RX received average optical power	Symbol: DDRx-Power Min: -2 Max: 2 Unit: dB
DIGITAL DIAGNOSTIC DYNAMIC RANGE FOR RATED ACCURACY
Internally measured transceiver temperature	Symbol: DDTemperature Min: 0 Max: 70 Unit: °C
Internally measured transceiver supply voltage	Symbol: DDVoltage Min: 3.14 Max: 3.46 Unit: V
Measured TX bias current	Symbol: DDBias Min: 0 Max: 20 Unit: mA
Measured TX output power	Symbol: DDTx-Power Min: -9 Max: -2.5 Unit: dBm
Measured RX received average optical power	Symbol: DDRx-Power Min: -20 Max: 0 Unit: dBm
DIGITAL DIAGNOSTIC MAX REPORTING RANGE
Internally measured transceiver temperature	Symbol: DDTemperature Min: -40 Max: 125 Unit: °C
Internally measured transceiver supply voltage	Symbol: DDVoltage Min: 2.8 Max: 4.0 Unit: V
Measured TX bias current	Symbol: DDBias Min: 0 Max: 20 Unit: mA
Measured TX output power	Symbol: DDTx-Power Min: -10 Max: -3 Unit: dBm
Measured RX received average optical power	Symbol: DDRx-Power Min: -22 Max: 0 Unit: dBm

ROHS Compliant

Alternate MPNs: N743D 0N743D

Weight: 0.5 lb

Warranty: 1 Year DiscTech

Brand New

Condition Levels Explained

The product is brand new.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty