Fujitsu MAP3147FC FC-AL Fibre Channel Hard Drive
- Factory RefurbishedCondition Levels Explained
The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.
Product Warranties ExplainedThe product has a manufacturer warranty for the time period specified.
- Special Order - Ships in 5-10 business daysSpecial Order - Ships in 5-10 business days
This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
- 1 Year DiscTechWarrantyProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
| Capacity: | 146GB |
| Speed: | 10K RPM |
| Interface Types: | Fibre Channel - Internal - Arbitrated Loop ASA II |
| Form Factor: | 3.5" LFF Hard Drive |
| Electrical Interface: | FC-AL - 2Gbps |
| RAM: | 8MB |
Description
Fujitsu MAP 147GB 10K 40pin FC-AL MAP3147FC Hard Drive - Factory Refurbished
Fujitsu’s new 10,000rpm MAP3xxx series includes models with optimum capacities of 36.7GB, 73.5GB and 147GB. The series is thus ideal for all mainstream Fibre Channel applications, such as enterprise servers, PC servers, workstations, and RAID subsystems, where data integrity and reliability are essential.
These new drives offer new performance standards with a maximum internal transfer rate of 107.8MB/s and a fast average seek time of 4.5ms. The series are equipped with an 8MB, multi-segmented data buffer combined with a 32-bit-wide internal data path for faster data access. In addition, the series support 40pin FC-AL Fibre Channel interface, which boasts new performance and reliability enhancing features, such as data packet protocol, quick arbitration and selection, and signal pre-compensation.
Concerning reliability, the new series features the industry’s highest MTBF rating 1,200,000 hours. It also incorporates many reliability enhanced features, such as alloy top cover for lower acoustics and an improved SMART detection system.
Specifications
Item | Specifications | |||
MAP3147FC | MAP3735FC | MAP3367FC | ||
Formatted capacity/device(*1) | 147.01 GB | 73.50 GB | 36.74 GB | |
Number of disks | 4 | 3 | 1 | |
Nubmer of heads | 8 | 4 | 2 | |
Number of cylinders(*2) | 47,908 | 47,978 | 48,104 | |
Formatted capcity/track (B) | 272,896 to 479,232 | |||
Number of rotations min (rpm) | 10,025 +_ 0.2% | |||
Average latency time | 2.99 msec | |||
Seek Time (*3) (Read/Write) | Track to Track Average Full stroke | 0.3 ms/0.5 ms 4.5 ms/5.0 ms 10.0 ms/11.0 ms | ||
Start/stop time (*4) | Start time Stop time | 30 s typ. (60 s max.) | ||
30 s typ. | ||||
Recording mode | 32/34 MEEPRML | |||
External dimensions | Height: Width: Depth: | 25.4 mm 101.6mm 146.0 mm | ||
Weight (max) | 0.75 kg | |||
Power consumption | 9.6 W | |||
Data transfer rate (*10) | Disk drive | 64.1 to 107.86 MBs | ||
Fibre | 2Gbps | |||
Logical data block length (*11) | 512 to 528 byte (Fixed length) | |||
SCSI command specifications | SPI-4 (T10/1365D Rev.7), SAM-2(T10/1157D Rev .20), SPC-2 (T10/1236D Rev. 20), SBC (T10/996D Rev. 8c | |||
Data buffer | 8 MB FIFO ring buffer | |||
Acostic noise (Ready) | 3.4 bels | |||
Weight: 1.8 lb
Warranty: 1 Year DiscTech
Condition
Factory Refurbished
Warranty
1 Year DiscTech Warranty