HEWLETT PACKARD Part #/MPN: 858384-B21
DiscTech Item #: HPI-858384-B21-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 8TB
Speed: 7,200RPM
Interface Types: SAS Serial Attached SCSI
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Electrical Interface: SAS-3 Serial Attached SCSI v3 - 12.0Gbps
Compatible Systems: HP 9th Gen. G9, HP 8th Gen. G8, HP 7th Gen. G7
HPE HPE 858384-B21 858650-001 819199-001 8TB 3.5" 12Gbps 7.2K RPM Midline 512e SC Digitally Signed Firmware SAS Hard Drive Kit 373211-001 - New Pull
HPE HPE 858384-B21 858650-001 819199-001 8TB 3.5" 12Gbps 7.2K RPM Midline 512e SC Digitally Signed Firmware SAS Hard Drive Kit 373211-001
Standard Carrier for HPE Servers and Storage Arrays that accepts larger than 2TB SAS drives.
HPE Hard Disk Drives
HPE Hard Disk Drives (HDDs) are engineered to deliver optimum performance, reliability, compatibility, and data security across HPE server and storage platforms making them the preferred choice for workloads ranging from small businesses to large enterprise.
Performance:
- HPE HDDs are tuned and tested with on-going quality monitoring throughout their life cycle
- HPE optimizes HDD firmware for predictable and consistent HDD performance
- Full portfolio of high-performance Mission Critical and high-capacity Business Critical drive solutions
Reliability:
- HPE’s industry-leading rigorous testing and qualification program, backed by 2.4 million test hours
- Pre-failure Alerts with HPE Smart Array Controller, Systems Insight Manager, and HPE Smart firmware
- 3x faster firmware and software updates with HPE Service Pack for ProLiant (HPE SPP)
- Best-in-class supply assurance program reduces downtime due to product delays
Compatibility:
- Simplify HDD planning and standardize HDDs across HPE server and storage solutions
- Common HDD carriers mean re-purposing drives in other servers is a snap
Security:
- HPE Digitally Signed Firmware helps prevent against malicious attacks
- HPE Smart Array SR Secure Encryption is a FIPS 140-2 Level 1 validated enterprise class controller-based encryption solution for data-at-rest on all SAS/SATA drives
- HPE Smart Carriers report drive activity and health
HPE HDDs are available for three types of workloads: Enterprise high-performance Mission Critical, Midline high-capacity Business Critical, and Entry-level storage solutions
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the following controllers:
- HPE Smart Array P212 Controller
- HPE Smart Array P410 Controller
- HPE Smart Array P411 Controller
- HPE Smart Array P711m Controller
- HPE Smart Array P812 Controller
Compatibility:
This Drive is compatible with the following HP MSA Storage systems:
MSA 1040MSA 2040 Gen 7 or lower Server with Standard Carrier bays and allows greater than 2TB SAS drives |
HPE SAS Hard Drive | |
---|---|
Manufacturer Part Number | 858384-B21 |
Alternate Part Number | |
General Information | |
Capacity | 8,000GB 8TB |
Height | 1.06 in 26.8 mm |
Width | 4.16 in 105.8 mm |
Depth | 6.69 in 170.0 mm |
Interface | SAS |
Transfer Rate Synchronous (Maximum) | 12 Gb/sec |
Seek Time | Single Track |
Rotational Speed | 7200 rpm |
Bytes/Sector | 512 |
Logical Blocks | 15628,053,168 |
Operating Temperature | 50° to 95° F 10° to 35° C |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Alternate MPNs: 858650-001 819199-001 858384-S21 858386-001 MB8000JFECQ
Weight: 2.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty