Hitachi HGST CinemaStar P7K500 0A37039 / HCP725016GLAT80 160GB 3.5" 7.2K IDE Hard Drive

HGST Part #/MPN: HCP725016GLAT80

DiscTech Item #: HIT-HCP725016GLAT80-BN-OE

$99.00

Brand New
Condition Levels Explained
The product is brand new.
Warranty:1 Year DiscTech
Product Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
Low Stock:Call for ETA
Stock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$99.00

Capacity: 160GB

Speed: 7.2K RPM

Interface Types: IDE ATA 3.5in

Form Factor: 3.5" LFF Hard Drive

Sector Size: 512 / 512e

Average Seek Time: 14.7 / 15.7

Electrical Interface: EIDE Ultra ATA133 133MBps

On-Board Cache: 8MB

Hitachi HGST CinemaStar P7K500 0A37039 / HCP725016GLAT80 160GB 3.5" 7.2K IDE Ultra ATA/133 Hard Drive - Brand New

Highlights

Data capacities of 160B
Spindle speeds of 7200 RPM
Fluid Dynamic Bearing motor
Enhanced IDE interface / Serial ATA interface
Sector format of 512 bytes/sector
Closed-loop actuator servo
Load/Unload mechanism, non head disk contact start/stop
Automatic Actuator lock
Interleave factor 1:1
Seek time of 14 ms(1D/2D) typical without Command Overhead
Sector Buffer size of 8192 KB(1D/2D) / 16384 KB(2D) (Upper 1000 KB / 1248.KB is used for firmware)
Ring buffer implementation
Write Cache
Native command queuing support (SATA model)
Advanced ECC On The Fly (EOF)
Automatic Error Recovery procedures for read and write commands
Self Diagnostics on Power on and resident diagnostics
Parallel ATA PIO Register/Data Transfer Mode 4 (16.6 MB/sec)
Parallel ATA DMA Data Transfer - Multiword mode Mode 2 (16.6 MB/sec) - Ultra DMA Mode 6 (133 MB/sec)
Serial ATA Data Transfer 3Gbps/1.5Gbps
CHS and LBA mode
Power saving modes/Low RPM idle mode (APM)
S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
Support security feature
Quiet Seek mode (AAM)
48 bit addressing feature
ATA-8 compliant
UDMA133 support
Streaming feature set support
World Wide Name
Write Uncorrectable
SATA 2.6 compliant

Compatibility:

This drive is compatible with any computer that accepts IDE / PATA drives.

Drive specification	0A37039 / HCP725016GLAT80
Formatted Gbytes (512 bytes/sector)	160
Bytes per sector	512
Spindle speed (RPM)	7,200
I/O data transfer rate (Mbytes/sec max)	133
Data buffer size (KB)	8,192/16384
Number of buffer segments (read)	up to 128
Number of buffer segments (write)	up to 63
Recording density- max (Kbpi)	970
Track density (Ktpi)	160
Areal density - max (Gbits/in)	155
Number of data bands	31
Idle mode (typical) watts	5.0
Ambient temperature	0° to 60°C (op.) –40° to 70°C (nonop.)