Hitachi CinemaStar P7K500 0A37039 0A37127 / HCP725025GLAT80 250GB 3.5" 7.2K IDE Ultra ATA/133 Hard Drive

Hitachi Part #/MPN: HCP725025GLAT80

DiscTech Item #: HIT-HCP725025GLAT80-FR-OE


$129.00
  • Special Order - Ships in 5-10 business days
    Special Order - Ships in 5-10 business days

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.

$129.00

Capacity: 250GB

Speed: 7,200RPM

Interface Types: IDE ATA 3.5in

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Average Seek Time: 14.7 / 15.7

Electrical Interface: EIDE Ultra ATA133 133MBps

On-Board Cache: 8MB

Hitachi HGST CinemaStar P7K500 0A37039 0A37127  / HCP725025GLAT80 250GB 3.5" 7.2K IDE Ultra ATA/133 Hard Drive - Factory Recertified

Hitachi HGST CinemaStar P7K500 0A37039 0A37127 / HCP725025GLAT80 250GB 3.5" 7.2K IDE Ultra ATA/133 Hard Drive - Factory Recertified

Highlights

  • Data capacities of 250GB 
  • Spindle speeds of 7200 RPM 
  • Fluid Dynamic Bearing motor 
  • Enhanced IDE interface / Serial ATA interface 
  • Sector format of 512 bytes/sector 
  • Closed-loop actuator servo 
  • Load/Unload mechanism, non head disk contact start/stop 
  • Automatic Actuator lock 
  • Interleave factor 1:1 
  • Seek time of 14 ms(1D/2D) typical without Command Overhead 
  • Sector Buffer size of 8192 KB(1D/2D) / 16384 KB(2D) (Upper 1000 KB / 1248.KB is used for firmware) 
  • Ring buffer implementation 
  • Write Cache 
  • Native command queuing support (SATA model) 
  • Advanced ECC On The Fly (EOF) 
  • Automatic Error Recovery procedures for read and write commands 
  • Self Diagnostics on Power on and resident diagnostics 
  • Parallel ATA PIO Register/Data Transfer Mode 4 (16.6 MB/sec) 
  • Parallel ATA DMA Data Transfer - Multiword mode Mode 2 (16.6 MB/sec) - Ultra DMA Mode 6 (133 MB/sec) 
  • Serial ATA Data Transfer 3Gbps/1.5Gbps 
  • CHS and LBA mode 
  • Power saving modes/Low RPM idle mode (APM) 
  • S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology) 
  • Support security feature 
  • Quiet Seek mode (AAM) 
  • 48 bit addressing feature 
  • ATA-8 compliant 
  • UDMA133 support 
  • Streaming feature set support 
  • World Wide Name 
  • Write Uncorrectable 
  • SATA 2.6 compliant


Compatibility:

This drive is compatible with any computer that accepts IDE / PATA drives.

Drive specification

0A37039 0A3712 HCP725025GLAT80 

Formatted Gbytes (512 bytes/sector)

250

Bytes per sector

512

Spindle speed (RPM)

7,200

I/O data transfer rate (Mbytes/sec max)

133

Data buffer size (KB)

8,192/16384

Number of buffer segments (read)

up to 128

Number of buffer segments (write)

up to 63

Recording density- max (Kbpi)

970

Track density (Ktpi)

160

Areal density - max (Gbits/in)

155

Number of data bands  

31

Idle mode (typical) watts

5.0

Ambient temperature

0° to 60°C (op.)

–40° to 70°C (nonop.)




Alternate MPNs: 0A37127 0A37039

Weight: 1.8 lb

Warranty: 1 Year DiscTech

Factory Refurbished

Condition Levels Explained

The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty