IBM / Lenovo 49Y6154 800GB SAS Solid State Drive Kit 46M2770

IBM Part #/MPN: 49Y6154

DiscTech Item #: IBM-49Y6154-BN-OE


$1,119.00
$1,119.00

Enterprise Grade

Capacity: 800GB

Speed: Solid State Memory

Interface Types: SAS Serial Attached SCSI

Form Factor: 2.5inx15mm SFF Server Drive

Sector Size: 512 / 512e

Sustained Throughput: 550/540

Electrical Interface: SAS-2 Serial Attached SCSI v2 - 6.0Gbps

SSD Type: MLC

SSD Endurance DWPD: Enterprise Mixed Use

IBM / Lenovo 49Y6154 / 49Y6155 800GB 2.5-Inch SFF eMLC SS Mixed Use SAS Solid State Drive kit 46M2770 for Systems x3530 M4, x3250 M4, dx360 M4 - Brand New

IBM / Lenovo 49Y6154 / 49Y6155 800GB 2.5" SFF / Small Form Factor eMLC / Enterprise Multi-Level Cell SS / Simple-Swap Mixed Use 10 Drive Writes Per Day / DWPD SAS / Serial Attached SCSI SSD / Solid State Drive kit 46M2770 for Systems x3530 M4, x3250 M4, dx360 M4 - Brand New

Introduction
The SAS MLC Enterprise solid-state drives (SSDs) for System x® employ MLC NAND technology to provide an affordable, but performance-driven solution for applications requiring enterprise workloads with a mix of read/write operations. These industry standard 2.5-inch and 3.5-inch form factor SSDs use a single-chip controller with a SAS interface on the system side and 16 channels of NAND flash internally. They provide outstanding performance, endurance, reliability, and energy efficiency for random read- and write-intensive enterprise workloads such as databases, data warehouses, corporate email and collaboration, actively connected users, caching and tiering applications, and others.

Did you know?
With SanDisk FlashGuard protection, SAS MLC Enterprise SSDs can be fully rewritten up to ten times per day throughout their entire five-year life expectancy. Unlike SATA drives, the SAS interface supports full duplex data transfer for higher performance, as well as dual port connectivity and enterprise-level error recovery for better availability.

Rigorous testing of SAS Enterprise MLC SSDs by Lenovo through the ServerProven® program assures a high degree of confidence in storage subsystem compatibility and reliability.

The part numbers for the SSDs include the following items:

  • One SSD with either a hot-swap or simple-swap tray, depending on the part number
  • Technical Update Flyer
  • Warranty Flyer
  • Important Notices document

Features
The SAS MLC Enterprise SSDs have the following features:

  • Industry standard 2.5-inch or 3.5-inch drive form factor
  • Utilizes 19 nm MLC NAND technology
  • Cost-effective MLC SAS drive with high read and write performance to fulfill client needs in the enterprise space
  • High endurance, with up to 29.2 PB of total bytes written (TBW) to withstand applications with intensive read/write workloads
  • Energy saving, with as little as 7 watt power consumption per drive
  • Absence of moving parts to reduce potential failure points in the server
  • S.M.A.R.T. support
  • Advanced Encrypting Standard (AES) 256-bit encryption
  • FlashGuard technology extends the native endurance of commercial-grade MLC flash
    • Aggregated Flash Management
    • Advanced Signal Processing
    • Enhanced Error Correction
  • DataGuard technology protects against data corruption and loss
    • Full data path protection
    • Flexible Redundant Array of Memory Elements (F.R.A.M.E.) data recovery algorithm
  • EverGuard technology protects data in the event of unplanned power outages
  • Static wear leveling evenly distributes data across the drive
  • Bad block management replaces failed blocks with new ones from the spare pool
  • Thermal throttling to extend the life of the drive
  • Data retention management to ensure availability and integrity of stored data
  • Minimal write amplification for efficient flash utilization and extended lifetime

The key difference between Enterprise SSDs such as the SAS MLC Enterprise SSDs and other SSDs is their endurance (or life expectancy). SSDs have a huge but finite number of program/erase (P/E) cycles, which affects how long they can perform write operations and thus their life expectancy. Enterprise SSDs have significantly better endurance but higher cost/IOPS ratio compared to Enterprise Value SSDs. SSD write endurance is typically measured by the number of program/erase cycles that the drive can incur over its lifetime, listed as TBW in the device specification.

The TBW value that is assigned to a solid-state device is the total bytes of written data that a drive can be guaranteed to complete. Reaching this limit does not cause the drive to immediately fail; the TBW simply denotes the maximum number of writes that can be guaranteed. A solid-state device will not fail upon reaching the specified TBW, but at some point after surpassing the TBW value (and based on manufacturing variance margins), the drive will reach the end-of-life point, at which time the drive will go into read-only mode. Because of such behavior, careful planning must be done to use SSDs in the application environments to ensure that the TBW of the drive will not be exceeded prior to the required life expectancy.

Alternate Model Number:

  • 49Y6155


Compatibility:

System DX360 M3System X3550 M5System x3250 M4System x3250 M5

SAS MLC Enterprise SSD
Part#49Y6154
Alt Part#49Y6155
Hot-swap driveNo
Form factor2.5"
Capacity800GB
Interface6 Gbps SAS
Endurance(drive writes per day)10 DWPD
Endurance(total bytes written)14.6 PB PBW / 14,600 TB TBW
Data reliability
< 1 in 10e17 bits read
MTBF, hours2,500,000 hours
IOPS reads95,000
IOPS writes40,000
Sequential read rate550 MBps
Sequential write rate540 MBps
Access time< 0.1 ms
Shock1000 g, 0.5 ms
Vibration2.17 gRMS 7-800 Hz
Typical power7 W

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Alternate MPNs: 49Y6155

Weight: 1 lb

Warranty: 1 Year DiscTech

Brand New

Condition Levels Explained

The product is brand new.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty