Kingston KSM26RS8-8HDI / KSM26RS8/8HDI 8GB 1Rx8 1G x 72-Bit PC4-2666 CL19 Registered RDIMM

Kingston KSM26RS8-8HDI / KSM26RS8/8HDI 8GB 1Rx8 1G x 72-Bit PC4-2666 CL19 Registered Parity 288-Pin RDIMM - Brand New

Kingston KSM26RS8-8HDI / KSM26RS8/8HDI 8GB 1Rx8 1G x 72-Bit PC4-2666 CL19 Registered Parity 288-Pin RDIMM - Brand New

FEATURES

Kingston's KSM26RS8/8HDI is a 1G x 72-bit (8GB) DDR4-2666

CL19 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx8,

ECC, memory module, based on nine 1G x 8-bit FBGA

components. The SPD is programmed to JEDEC standard

latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin

DIMM uses gold contact fingers. The electrical and mechanical

specifications are as follows:

• Power Supply: VDD = 1.2V

• VDDQ = 1.2V

• VPP = 2.5V

• VDDSPD = 2.41V to 2.75V

• Functionality and operations comply with the DDR4 SDRAM datasheet

• 16 internal banks

• Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for

 the banks in the same or different bank group accesses are available

• Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

• Supports ECC error correction and detection

• On-Die Termination (ODT)

• Temperature sensor with integrated SPD

• This product is in compliance with the RoHS directive.

• Per DRAM Addressability is supported

• Internal Vref DQ level generation is available

• Write CRC is supported at all speed grades

• CA parity (Command/Address Parity) mode is supported

Compatibility: Any Server or systems that will take DDR4-2666 ECC 288pin RDIMM

ROHS Compliant

Alternate MPNs: KSM26RS8/8HDI

Weight: 0.25 lb

Warranty: 1 Year Manufacturer

Brand New

1 Year Manufacturer Warranty