Micron 1300 MTFDDAK1T0TDL-1AW12ABYY 1TB SED SATA Solid State Drive

Micron Part #/MPN: MTFDDAK1T0TDL-1AW12ABYY

DiscTech Item #: MIC-MTFDDAK1T0TDL-1AW12ABYY-BN-5Y


$198.00
  • Special Order - Ships in 2-4 weeks
    Special Order - Ships in 2-4 weeks

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.

$198.00

Capacity: 1TB

Speed: Solid State Memory

Interface Types: SATA

Form Factor: 2.5inx7mm Fits All laptops

Encryption/SED Supported

Sector Size: 512 / 512e

Sustained Throughput: 530/520

Electrical Interface: SATA 600 - 6.0Gbps

SSD Type: TLC

SSD Endurance DWPD: Consumer / Value

Micron 1300 MTFDDAK1T0TDL-1AW12ABYY 1TB 2.5-Inch 6Gbps 3D NAND TLC SED SATA Solid State Drive - Brand New

Micron 1300 MTFDDAK1T0TDL-1AW12ABYY 1TB / 1000GB 2.5" 6.0 Gb/s 3D NAND TLC / Triple Level Cell Consumer / Value 0.2-DWPD / Drive Writes Per Day SED / Self Encrypting SATA / Serial ATA SSD / Solid State Drive - Brand New

Cost-Effective Flash for Client Computing
As spinning media for client computers is winding down, the demand for solid performing SATA client solid state drives (SSDs) continues strong. The Micron® 1300 SATA client SSD is an expansion of our SATA portfolio, the broadest in the industry. From mainstream desktops to corporate roadwarrior tablets, the 1300 SSD provides exceptional price-to-performance ratios and extremely low power consumption for client computing. It’s an economical flash option in the changeover from legacy hard drives.

Based on the successful Micron 1100 SSD, the Micron 1300 SATA SSD is built with advanced features, such as device sleep (DEVSLP) low-power modes to further extend battery life. To protect your valuable data, multiple features do the job: asynchronous power-loss protection for data at rest, adaptive thermal monitoring and optional Opal 2.0 self-encryption.

Using revolutionary 3D NAND technology, Micron’s state of the art process – CMOS under the array (CUA) – allows for reduced cost and increased density in a 96-layer, vertically tiered compact die. This advancement keeps the price competitive and allows the Micron 1300 to be offered in 1TB M.2 and 2TB 2.5” capacities.

Key Benefits

  • Better NAND Means Better Products
    Reliability you can get only from a trusted NAND manufacturer. The 1300 SSD features triple-layer cell (TLC) technology, for more data storage in the same footprint. More cost control comes from the state-of-the-art stackable 96-Tier 3D NAND die that allows for up to 2TB in a 2.5” and 1TB in a M.2 form factor.
  • Get Solid SATA Performance
    Many organizations are still looking for strong SATA performance. As a follow-on to our well-accepted Micron 1100 SSD client drive, the 1300 draws on the same trusted platform architecture, proven controller and firmware.
  • Go Mobile for Longer
    Class-leading power efficiency satisfies customers’ everincreasing expectations for longer battery life. Consuming less than 5mW in low power mode, the Micron 1300 uses significantly less power than that required by hard disk drives (HDDs). Over 20X less than HDDs in active mode. That’s more employee uptime!

More Key Benefits

  • Keep It Cool
    Increase reliability in space-constrained designs with our adaptive thermal monitoring feature that limits heat generated by the SSD with the small footprint M.2 form factor
  • Depend on Our Endurance
    The optimization of 3D TLC NAND component and Micron SSD architecture enables the 1300 SSD to deliver strong performance and solid endurance without compromise.
  • Speed Time to Market
    As the 1300 SSD is highly leveraged from the Micron 1100 SSD, qualification processes for our OEM customers are reduced, saving time and money.
  • Protect Your Data
    Optional Opal self-encryption drive (SED) technology offers rock-solid encryption for data-at-rest for your valued mobile data without performance degradation. All encryption/decryption utilizes a XTSAES-256-bit hardware engine that complies with the TCG™ Opal 2.0 standards, the IEEE 1667 protocol and Microsoft® eDrive, without impacting performance.
  • Sanitize and Reuse
    In just a few seconds, the SANITIZE CRYPTO SCRAMBLE command allows the end-user to erase, repurpose, and retire the SSD with a click of a button, ensuring no residual data is left behind to be compromised.
  • Make it Easier to Manage
    With our downloadable Storage Executive tool, Micron client drives have built-in troubleshooting, diagnostics and health check intelligence for hassle-free manageability.


Compatibility:

This drive is compatible with servers and arrays that accept 2.5" x 15mm SATA drives

Micron® 1300 SATA TLC SSD
Standard Part SEDMTFDDAK1T0TDL-1AW12ABYY / MTFDDAK1T0TDL-1AW12AB
CategoryCorporate and Consumer PCs and Notebooks
ModelMicron 1300 SATA TLC SSD
InterfaceSATA 6 Gb/s
Capacity1TB / 1000GB
Form Factor2.5"
Sequential read (MB/s)530
Sequential write (MB/s)520
Random Read (IOPS)90K
Random Write (IOPS)87K
Endurance400
Mean Time to Failure (MTTF)1.5 million hours
DEVSLP (mW)5
Advanced Features
  • Power-Loss Protection (data at rest)
  • Adaptive Thermal Monitoring
  • Optional TCG Opal Encryption
  • Garbage Collection, S.M.A.R.T.

  • Click here to view the manufacturer's item description/brochure

    Alternate MPNs: MTFDDAK1T0TDL-1AW12AB

    Weight: 1 lb

    Warranty: 5 Year Manufacturer

    Brand New

    Condition Levels Explained

    The product is brand new.

    5 Year Manufacturer Warranty

    Product Warranties Explained

    The product has a manufacturer warranty for the time period specified.