• Home
  • Micron 5200 ECO MTFDDAK3T8TDC-1AT1ZABYY 3.84TB SATA Solid State Drive

Micron 5200 ECO MTFDDAK3T8TDC-1AT1ZABYY 3.84TB SATA Solid State Drive

Micron 5200 ECO MTFDDAK3T8TDC-1AT1ZABYY 3.84TB SATA Solid State Drive

$729.00

Capacity:3.84TB
Speed:Solid State
Interface Types:SATA
Form Factor:2.5" x 7mm Fits All laptops
SSD Endurance DWPD:Enterprise Read Intensive / RI
Electrical Interface:SATA 600 - 6Gbps
Click to see more 3.84TB SATA Solid State Drives

Description

Micron 5200 ECO MTFDDAK3T8TDC-1AT1ZABYY 3.84TB 2.5-Inch 6Gbps eTLC Read Intensive SATA Solid State Drive - Brand New

Micron 5200 ECO MTFDDAK3T8TDC-1AT1ZABYY 3.84TB / 3840GB 2.5" 6.0 Gb/s eTLC / Enterprise Triple Level Cell RI / Read Intensive 1-DWPD / Drive Writes Per Day SATA / Serial ATA SSD / Solid State Drive - Brand New

Alt Model#: MTFDDAK3T8TDC-1AT1ZAB

The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption and extended reliability.

The self-encrypting drive (SED) features an AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG Enterprise specification for trusted peripherals. When TCG Enterprise features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide full disk encryption (FDE) managed in the host system BIOS. TCG Enterprise and ATA security feature sets cannot be enabled simultaneously.

The data encryption is always running; however, encryption keys are not managed and the data is not secure until either TCG Enterprise or ATA security feature sets are enabled.

Features

  • Micron® 3D TLC NAND Flash
  • Three performance/endurance levels
    • ECO
    • PRO
    • MAX
  • TCG Enterprise compliant self-encrypting drive (SED)
  • SATA 6 Gb/s interface
  • ATA modes supported
    • PIO mode 3, 4
    • Multiword DMA mode 0, 1, 2
    • Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
  • 512-byte sector size support
  • Hot-plug capable
  • Native command queuing support with 32-command slot support
  • ATA-8 ACS-3 revision 5 command set compliant
  • ATA security feature command set and password login support
  • Security erase command set: fast and secure erase
  • Performance (steady state)
    • Sequential 128KB read: Up to 540 MB/s
    • Sequential 128KB write: Up to 520 MB/s
    • Random 4KB read: Up to 95,000 IOPS
    • Random 4KB write: Up to 75,000 IOPS
  • Quality of Service
    • Read/Write (99.9%): 200µs/300µs
    • Read/Write (99.999%): 1000µs/700µs
  • Endurance : Total bytes written (TBW)
    • Up to 17600TB
  • Reliability
    • MTTF: 3.0 million device hours
    • Static and dynamic wear leveling
    • Uncorrectable bit error rate (UBER): <1 sector per 10e17 bits read
    • End-to-end data protection
    • Enhanced power-loss data protection with data protection capacitor monitoring
  • Self-monitoring, analysis, and reporting technology (SMART) command set
  • Capacity (unformatted): 240GB, 480GB, 960GB, 1920GB, 3840GB, 7680GB
  • Mechanical:
    • 2.5-inch x 7.0mm form factor
  • RoHS-compliant package
  • Secure field-upgradeable firmware with digitally signed firmware image
  • Power consumption:
    • <6.0W(TYP, 5V only)
  • Operating temperature
    • Commercial (0°C to 70°C)


Compatibility:

This drive is compatible with servers and arrays that accept 2.5” 7mm SATA drives

Specifications

Micron 5200 ECO
Model NumberMTFDDAK3T8TDC-1AT1ZABYY / MTFDDAK3T8TDC-1AT1ZAB
Technical Specification
BrandMicron
ManufacturerMicron Enterprise SSD
Model5200 ECO
Capacity3.84TB / 3840GB
Encryption DetailsNot Encrypted
Form Factor2.5in (6.4cm)
Sequential Read (128KB transfer)540
2.5W
Sequential Write (128KB transfer)520
3.3W
Random Read (4KB transfer)95,000
Random Write (4KB transfer)17,000
Random 70/30 R/W (4KB transfer)46,000
Read latency (99.9%)200µs
Write latency (99.9%)500µs
Read latency (99.999%)1000µs
Write latency (99.999%)10,000µs
Drive Lifetime (Total Bytes Written)7,700TB
Voltage InputSymbol
  • V12
  • V5

  • Min
  • 10.8V
  • 4.5V

  • Max
  • 13.2V
  • 5.5V
  • Operating temperatureMin: 0°C
    Max: 70°C
    Non Operating temperatureMin: -40°C
    Max: 85°C
    Rate of temperature changeMax: 20°C/hour
    Relative humidity (non-condensing)Min: 5%
    Max: 95%
    Min Operating Temperature32°F
    Non-operating shock1500G/0.5ms
    Non-operating vibration5–800Hz at 3.13 Grms
    Uncorrectable Bit Error Rate<1 sector per 10e17 bits
    MTTF3.0 million
    Idle Average1.5W
    Flash Type3D eTLC
    Dimensions (W x L x H)69.85mm x 100.45mm x 7.00mm

    Click here to view the manufacturer's item description/brochure

    ROHS Compliant

    Alternate MPNs: MTFDDAK3T8TDC-1AT1ZAB

    Weight: 1 lb

    Warranty: 5 Year Manufacturer

    Condition

    Brand New

    Warranty

    5 Year Manufacturer Warranty