Micron 5200 MAX MTFDDAK960TDN-1AT1ZABYY 960GB SATA Solid State Drive

Micron Part #/MPN: MTFDDAK960TDN-1AT1ZABYY

DiscTech Item #: MIC-MTFDDAK960TDN-1AT1ZABYY-BN-5Y


$329.00
  • Special Order - Ships in 3-5 business days
    Special Order - Ships in 3-5 business days

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.

$329.00

Enterprise Grade

Capacity: 960GB

Speed: Solid State Memory

Interface Types: SATA

Form Factor: 2.5inx7mm Fits All laptops

Sector Size: 512 / 512e

Sustained Throughput: 540/520

Electrical Interface: SATA 600 - 6.0Gbps

SSD Type: TLC

SSD Endurance DWPD: Enterprise Mixed Use

Micron 5200 MAX MTFDDAK960TDN-1AT1ZABYY 960GB 2.5-Inch 6Gbps eTLC Mixed Use SATA Solid State Drive - Brand New

Micron 5200 MAX MTFDDAK960TDN-1AT1ZABYY 960GB 2.5" 6.0 Gb/s 3D eTLC / Enterprise Triple Level Cell NAND MU / Mixed Use 5- DWPD / Drive Writes Per Day SATA / Serial ATA SSD / Solid State Drive - Brand New

Micron® 5200 Series SATA NAND Flash SSD

The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption and extended reliability

The self-encrypting drive (SED) features an AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG Enterprise specification for trusted peripherals. When TCG Enterprise features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide full disk encryption (FDE) managed in the host system BIOS. TCG Enterprise and ATA security feature sets cannot be enabled simultaneously

The data encryption is always running; however, encryption keys are not managed and the data is not secure until either TCG Enterprise or ATA security feature sets are enabled.

Features

  • Micron® 3D TLC NAND Flash
  • Three performance/endurance levels
    • ECO
    • PRO
    • MAX
  • TCG Enterprise compliant self-encrypting drive (SED)
  • SATA 6 Gb/s interface
  • ATA modes supported
    • PIO mode 3, 4
    • Multiword DMA mode 0, 1, 2
    • Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
  • 512-byte sector size support
  • Hot-plug capable
  • Native command queuing support with 32-command slot support
  • ATA-8 ACS-3 revision 5 command set compliant
  • ATA security feature command set and password login support
  • Security erase command set: fast and secure erase
  • Performance (steady state)
    • Sequential 128KB read: Up to 540 MB/s
    • Sequential 128KB write: Up to 520 MB/s
    • Random 4KB read: Up to 95,000 IOPS
    • Random 4KB write: Up to 75,000 IOPS
  • Quality of Service
    • Read/Write (99.9%): 200µs/300µs (<2TB)
    • Read/Write (99.999%: 1000µs/700µs (<2TB)
  • Endurance: Total bytes written (TBW)
    • Up to 17600TB
  • Reliability
    • MTTF: 3.0 million device hours
    • Static and dynamic wear leveling
    • Uncorrectable bit error rate (UBER): <1 sector per 10 bits read
    • End-to-end data protection
    • Enhanced power-loss data protection with data protection capacitor monitoring
  • Self-monitoring, analysis, and reporting technology (SMART) command set
  • Capacity (unformatted): 240GB, 480GB, 960GB, 1920GB, 3840GB, 7680GB
  • Mechanical:
    • 2.5-inch x 7.0mm form factor
  • RoHS-compliant package
  • Secure field-upgradeable firmware with digitally signed firmware image
  • Power consumption: <6.0W (TYP, 5V only)
  • Operating temperature
    • Commercial (0°C to 70°C)


    Compatibility:

    Designed for virtualized workloads that power your business, such as OLTP, BI/DSS, VDI, block/object, media streaming and more.

Micron 5200 Series NAND Flash SSD
Model#MTFDDAK960TDN-1AT1ZABYY
Specifications
Capacity960GB
Product Family5200 MAX
InterfaceSATA 6 Gb/s
Form Factor2.5" x 7mm
NAND Flash TypeTriple Level Cell (TLC)
NAND Flash Component512Gb, TLC, x , V (3D)8 3.3
Sector Size512 bytes
Extended Firmware FeaturesNone
Sequential read (128KB transfer)540 MB/s
Sequential write (128KB transfer)520 MB/s
Random read (4KB transfer)95,000 IOPS
Random write (4KB transfer)75,000 IOPS
Random 70/30 R/W (4KB transfer)70,000 IOPS
READ latency (99.9%)200 µs
WRITE latency (99.9%)300 µs
READ latency (99.999%)1000 µs
WRITE latency (99.999%)700 µs
Uncorrectable Bit Error Rate<1 sector per 1017 bits
Mean Time to Failure (MTTF)3.0 Million
Endurance8760 TBW
Idle Average1.5W
Sequential Write (128KB transfer)3.4 W
Sequential Read (128KB transfer)2.8 W
Non-operating shock1500G/0.5ms
Rotary vibration, non-operating5–800Hz at 3.13 Grms
Operating Temperature0°C to 70°C

Click here to view the manufacturer's item description/brochure

Alternate MPNs: MTFDDAK960TDN-1AT1ZAB

Weight: 1 lb

Warranty: 3 Year Manufacturer

Brand New

Condition Levels Explained

The product is brand new.

3 Year Manufacturer Warranty

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.