Micron M600 MTFDDAK256MBF-1AN1ZABYY 256GB SATA SSD

- RefurbishedCondition Levels Explained
These products have had NO problems or failures, they merely have some usage. The product has been professionally returned to excellent condition. These items have been fully tested, formatted (if appropriate) &repackaged. Hard drives are fully vetted for surface defects and wear, only healthy disks are approved for resale to our customers. Please see our refurbishing process for more details. Watch a video about our refurbishing process
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
- 1 Year DiscTechWarrantyProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
Capacity: | 256GB |
Speed: | Solid State |
Interface Types: | SATA |
Form Factor: | 2.5" x 7mm Fits All laptops |
SSD Endurance DWPD: | Consumer / Value |
Electrical Interface: | SATA 600 - 6Gbps |
Description
Micron M600 MTFDDAK256MBF / MTFDDAK256MBF-1AN1ZABYY 256GB 2.5" 6Gbps MLC 512 NAND Flash SATA SSD / Solid State Drive - Refurbished
Micron M600 MTFDDAK256MBF / MTFDDAK256MBF-1AN1ZABYY 256GB 2.5" 6.0 Gb/s 3D NAND MLC / Multi Level Cell Consumer / Value TAA / Trade Agreements Act Compliant SATA / Serial ATA SSD / Solid State Drive - Refurbished
Alt Model#: MTFDDAK256MBF-1AN1ZABYY
General Description:
Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on
the system side and eight channels of Micron NAND Flash internally. Packaged in an
HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.
The SSD is designed to use the SATA interface efficiently during both READs and
WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.
The self-encrypting drive (SED) features a FIPS-compliant, AES-256 encryption engine,
providing hardware-based, secure data encryption, with no loss of SSD performance.
This SED follows the TCG/Opal specification for trusted peripherals.
When TCG/Opal features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide fulldisk encryption (FDE) managed in the host system BIOS. TCG/Opal and ATA security
feature sets cannot be enabled simultaneously.
The data encryption is always running; however, encryption keys are not managed and
the data is not secure until either TCG/Opal or ATA security feature sets are enabled.
Compatibility:
This drive is compatible with servers and arrays that accept 2.5” 7mm SATA drives
Specifications
Micron M600 3D NAND SATA SSD | |
---|---|
Model Number | MTFDDAK256MBF / MTFDDAK256MBF-1AN1ZABYY |
Specification | |
Capacity | 256GB |
Category | Corporate PCs and Notebooks |
Model | Micron M600 |
Interface | SATA 6 Gb/s |
Sequential read (MB/s) | 560 |
Sequential write (MB/s) | 510 |
Random Read (IOPS) | 100K |
Random Write (IOPS) | 88K |
Read/Write Latency | 120/30µs |
Mean Time to Failure (MTTF) | 1.5 million hours |
Power consumption (Idle) | 70 mW |
Power consumption(Active) | 150 mW |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Alternate MPNs: MTFDDAK256MBF-1AN1ZABYY
Weight: 0.25 lb
Warranty: 1 Year DiscTech
Condition
Refurbished
Warranty
1 Year DiscTech Warranty