Micron MTA18ASF2G72PDZ-2G6H1 16GB DDR4-2666 PC4 ECC 2Rx8 RDIMM

Micron Part #/MPN: MTA18ASF2G72PDZ-2G6H1

DiscTech Item #: MIC-MTA18ASF2G72PDZ-2G6H1-NP-OE

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.


Form Factor: DDR4 RDIMM

Electrical Interface: PC4-21300

On-Board Cache: 16GB

Voltage: 1.2V

Micron MTA18ASF2G72PDZ-2G6H1 16GB DDR4-2666 PC4  ECC Registered 288-Pin 2Rx8 RDIMM - New Pull

Micron MTA18ASF2G72PDZ-2G6H1 16GB DDR4-2666 PC4  ECC Registered 288-Pin 2Rx8 RDIMM - New Pull


• DDR4 functionality and operations supported as

defined in the component data sheet

• 288-pin, registered dual in-line memory module


• Fast data transfer rates: PC4-3200, PC4-2933,

PC4-2666, or PC4-2400

• 16GB (2 Gig × 72)

• VDD = 1.20V (NOM)

• VPP = 2.5V (NOM)

• VDDSPD = 2.5V (NOM)

• Supports ECC error detection and correction

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2C temperature sensor with integrated

serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Gold edge contacts

• Halogen-free

• Fly-by topology

• Terminated control, command, and address bus

Compatibility: Any Server or systems that will take DDR4-2666 ECC 288pin RDIMM

Model NumberMTA18ASF2G72PDZ-2G6H1
Form FactorRDIMM
Capacity16GB Kit (1 piece)
  • DDR4 PC4-2666
  • CL=19
  • 2Rx8
  • Dual Rank
  • Registered
  • ECC
    Kit Qty1
    DIMM TypeRegistered

    Click here to view the manufacturer's item description/brochure

    ROHS Compliant

    Alternate MPNs: MTA18ASF2G72PDZ

    Weight: 0.25 lb

    Warranty: Factory Warranty

    New Pull

    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

    Factory Warranty Warranty