NETGEAR Part #/MPN: MS510TXPP-100NAS
DiscTech Item #: NET-MS510TXPP-100NAS-BN-FW
Item is out of stock. Please call for alternatives.
- Brand NewCondition Levels Explained
The product is brand new.
- Warranty:Factory Warranty
- Special Order - Call for Lead TimeSpecial Order - Call for Lead Time
This item has a variable lead time for fulfilment. Please call us to discuss. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
Interface Types: Ethernet RJ45, SFP
Electrical Interface: Ethernet 10Gigabit - 10Gbps
Wattage/VA: 240W
Voltage: 110-240V Multi
NetGear MS510TXPP-100NAS 8-port PoE+ Multi-Gigabit Smart Managed Pro Switch w/2 10G Copper / Fiber Uplinks - Brand New
NetGear MS510TXPP-100NAS 8-port PoE+ / Power Over Ethernet Plus Multi-Gigabit Smart Managed Pro Switch with 2x 10G / 10 Gigabit Copper / Fiber Uplinks - Brand New
Multi-Gigabit Ethernet Smart Managed Pro Switches
Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deployments
Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.
That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.
Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.
Highlights
- Plenty of headroom with 1G, 2.5G, 5G and even 10G!
- Two Multi-Gigabit RJ-45 ports that support 5G, 2.5G, and 1G
- Two Multi-Gigabit RJ-45 ports that support 2.5G and 1G
- Four 1G RJ-45 ports
- One dedicated 10G RJ-45 port (which also supports 5G, 2.5G and 1G) for uplink or local server / storage
- One dedicated SFP+ fiber uplink port that supports 10G and 1G for uplink or local server / storage
- Key features include:
- MS510TXPP: 180W PoE budget available across 8 Gigabit and Multi-Gigabit PoE+ ports (802.3at)
- Multi-Gigabit, multi-speed ports to connect any type of device to a single switch
- Quiet desktop operation or rack mounting with 21dB (MS510TX) or 28.8dB max (MS510TXPP) at 25°C (77°F) ambient
- Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing
- Non-blocking 78Gbps fabric for 2x5Gbps+ 2x2.5Gbps+4x1Gbps+2x10Gbps full duplex switching and routing
- Advanced VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
- MS510TXPP: Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)
- Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
- Auto “denial-of-service” (DoS) prevention
- IGMP Snooping and Querier for multicast optimization
- Rate limiting and priority queuing for better bandwidth allocation
- Port mirroring for network monitoring
- Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
- Cable test to troubleshoot connection issues
- Easy-to-use Web browser-based management GUI
- SNMP v1, v2c, v3 and RMON remote monitoring
- Smart IT, not Big IT
- Easy-to-use Web browser-based management GUI makes setup and management simple
- Standards-based technology ensures interoperability with any standards-based devices in the existing network
- Dual firmware images improve reliability and uptime to your network
- Worry-free with NETGEAR ProSAFE LIFETIME Hardware Warranty
- Minimal down-time with NETGEAR ProSAFE LIFETIME Next-Business-Day Replacement Warranty
- Get deployment assistance with 90-days Free 24x7 Advanced Technical Phone Support
- LIFETIME Online Chat Technical Support
MS510TXPP: 8-port PoE+ Multi-Gigabit Smart Managed Pro Switch with 10G Copper / Fiber Uplinks
- 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G/5G with PoE+
- 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G with PoE+
- 4-port RJ-45 Gigabit Ethernet 10M/100M/1G with PoE+
- 1-port RJ-45 10 Gigabit Ethernet Copper (100M/1G/2.5G/5G/10GBASE-T)
- 1-port SFP+ 10 Gigabit Ethernet Fiber (1G/10GBASE-X SFP+)
- 28.8dB max at 25°C (77°F) ambient
Multi-Gigabit Ethernet Smart Managed Pro Switches | |
---|---|
model Name | MS510TXPP / MS510TXPP-100NAS |
Hardware at a Glance | |
Front | Form Factor |
Rear | Power Supply |
Side | Fans |
Software at a Glance | |
LAYER 2+ / LAYER 3 LITE FEATURES | Management |
Performance at a Glance | |
Packet buffer | 1.5MB |
CPU | |
ACLs | 164 shared (ingress) |
MAC Address Table RP/NDP Table VLANs | |
Fabric | 78Gbps line-rate |
Latency (Max Connection Speed) | 10GBASE-T |
Static Routes (IPv4 & IPv6) | IPv4 |
Multicast IGMP Group | 512 |
Click here to view the manufacturer's item description/brochure
Alternate MPNs: MS510TXPP
Weight: 5 lb
Warranty: Factory Warranty
Brand New
The product is brand new.
Factory Warranty Warranty