QNAP TS-473-8G-US 4-Bay NAS Server - Diskless

QNAP Part #/MPN: TS-473-8G-US

DiscTech Item #: QNA-TS-473-8G-US-BN-2Y


$799.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$799.00

Interface Types: SATA, USB 3.0 3.1 3.2, Ethernet RJ45

Form Factor: 3.5inx1.0in LFF Hard Drive

Encryption/SED Supported

Electrical Interface: Ethernet Gigabit - 1Gbps

On-Board Cache: 4GB

Bays/Ports/Slots: 4

Wattage/VA: 250W

Voltage: 110-240V Multi

QNAP TS-473 TS-473-8G-US 4-Bay AMD R-Series RX-421ND Turbo NAS Server w/ 8GB RAM - Diskless - Brand New

QNAP TS-473 TS-473-8G-US 4-Bay AMD R-Series RX-421ND Turbo NAS / Network Attached Storage Server with 8GB (2 x 4GB) RAM - Diskless - Brand New

QNAP TS-473-4G 4-bay Network Attached Storage Server includes ...

  • 4 x USB 3.0 (1 x Front, 3 x Rear)
  • 4 x Ethernet RJ45 1GbE LAN ports
  • 4 drive bays
  • 8GB (2 x 4GB) SODIMM DDR4-1600 RAM
  • AMD R-Series RX-421ND quad-core 2.1 GHz processor
  • Turbo Core up to 3.4 GHz
  • Accepts 3.5" and 2.5" SATA hard drives and 2.5" SATA solid state drives
  • Encryption capable

The TS-473 is powered by a high-performance and energy-efficient AMD R-Series CPU and provides two PCIe slots for greater functionality. You can install a QNAP QM2 expansion card to add M.2 SSD caching/10GbE connectivity; a compatible wireless card to use the TS-473 as a wireless access point; and an entry-level graphics card to boost system performance for 4K video performance. The TS-473 allows you to flexibly deploy a wide range of applications with a more affordable budget.

  • Two PCIe Gen3 x4 slots support QM2 cards, 10GbE adapters, or wireless network cards.
  • Supports entry-level graphics card, allowing for 4K video transcoding and output.
  • Dual M.2 SATA 6 Gb/s SSD slots allow for setting up caching or storage pools, improving file access efficiency.
  • Qtier auto-tiering technology and SSD caching enable 24/7 optimized storage efficiency.
  • Scalable storage supporting virtualization, containerized apps, centralized storage, backup, sharing, and disaster recovery.
  • Snapshots fully record system status and data. If files are accidentally deleted or modified, you can quickly restore the data from a snapshot.

Note:
Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.

QNAP
Model NumberTS-473-8G / TS-473-8G-US
Hardware Specification
CPUProcessor: AMD R-Series RX-421ND quad-core 2.1 GHz processor, Turbo Core up to 3.4 GHz
Architecture: 64-bit
Encryption Engine: AES-NI
System Memory8GB DDR4 (2 x 4 GB)
Maximum Memory64 GB (4 x 16 GB)
Memory Slot4 x SODIMM DDR4
(For dual- or quad-DIMM configurations, you must use a pair of identical DDR4 modules.)
Flash Memory512 MB DOM
Drive Bay4 x SATA 6 Gbps bays
Drive Compatibility3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
SSD Cache Acceleration Support
  • Drive bays 1 to 4
  • M.2 slots 1 to 2
  • Optional: M.2 SSD using QNAP QM2 PCIe expansion card
  • Hot-SwappableYes
    The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
    M.2 SSD Slot 2 x M.2 2260/2280 SATA 6Gb/s SSDs (Sold separately)

    Note:
    1. The M.2 SSD is not included as standard.
    2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
    Gigabit Ethernet Port4 x RJ45
    PCIe Slot2 x PCIe 3.0 x4
    Note: Support low-profile 10GbE LAN card, USB 3.1 Gen2 (10Gb/s) expansion card, QM2 card, PCIe wireless network card or a bus-powered graphics card.
    USB PortUSB 3.0 (Front: 1; Rear: 2)
    Audio
  • 2 x 3.5 mm dynamic microphone jacks
  • 1 x 3.5 mm line-out jack
  • 1 x speakers
  • Note: You cannot use the speakers and the line-out jack simultaneously.
    USB One Touch Copy Front: USB 3.0
    IR sensor Optional QNAP RM-IR004 remote control (MCE compatible)
    Form Factor Tower
    Dimensions (H x W x D) 188.2 x 199.3 x 279.6 mm
    7.41 x 7.85 x 11.01 inch
    Power Consumption (W) HDD standby: 33.24 W
    In operation: 56.23 W
    (with 4 x 2TB HDDs installed)
    Sound Level Sound pressure (LpAm): 21.7 dB(A)
    Net Weight 4.84 kg (10.67 lbs)
    Power Supply Unit 250W, 100-240V AC, 50/60Hz
    Fan System: 1 x 120 mm
    CPU: 1 x 60 mm
    Operating Temperature & Relative Humidity 0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
    Security Slot Kensington security slot

    Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
    * Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS. Designs and specifications are subject to change without notice.


    Click here to view the manufacturer's item description/brochure

    ROHS Compliant

    Alternate MPNs: TS-473-8G TS-473A-8G-US

    Weight: 12 lb

    Warranty: 2 Year Manufacturer

    Brand New

    Condition Levels Explained

    The product is brand new.

    2 Year Manufacturer Warranty

    Product Warranties Explained

    The product has a manufacturer warranty for the time period specified.