Quantum DLT7000 TH6AA-YF 35-70GB SCSI Tape Drive

- Special Order - Ships in 5-10 business daysSpecial Order - Ships in 5-10 business days
This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
- 1 Year DiscTechWarrantyProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
| Interface Types: | SCSI 68pin HD68 |
| Form Factor: | 5.25inx3.2in Full Height Drive |
| Electrical Interface: | SCSI II Fast - 10MBps 16-bit |
| RAM: | 4MB |
| Voltage: | 110-240V Multi |
Description
Quantum DLT7000 TH6AA-YF 35/70GB SCSI HD68 68 pin Tape Drive - Refurbished
Quantum DLT7000 TH6AA-YF 35/70GB SCSI HD68 68 pin Tape Drive - Refurbished
PRODUCT DESCRIPTION
The Quantum DLTÔ 7000 tape system is a high-performance, high-capacity, streaming cartridge tape system designed for efficient data back-up for midrange and high-end computing systems. With Quantum’s DLT advanced linear recording technology, a highly accurate tape guide system, and an adaptive control mechanism, the drive is ideally suited for mid-range systems, network servers, and high-end workstations and systems.
Using data compression, the DLT 7000 tape system features a formatted capacity of 70.0 GB* and a sustained user data transfer rate of 10 MB/second* (native capacity is 35.0 GB; native data transfer rate is 5.0 MB/second).
The device is an extended-length, 5.25-inch form factor, half-inch cartridge tape drive. The design includes a four-channel read/write head, Lempel-Ziv (LZ) high-efficiency data compression, and tape mark directory to maximize data throughput and minimize data access time.
The system is available either as an integratible or “embedded” drive or as a tabletop version. The tabletop version is packaged in housing that includes its own cooling fan and power supply, requiring ac power.
The DLT 7000 tape offers the following product features:
- 35.0 GB Native, 70.0 GB Compressed Capacity (Formatted capacity assuming a 2:1 data compression ratio. Note that actual compression ratio depends on the type of data, SCSI bus limitations, and system configuration.) 35.0 · Superior Error Detection and Correction
- Extensive Embedded Diagnostic/Self-Test Software
- Fast access to Data via Tape Mark Directory
- Tape-Loadable Firmware
Specifications
| DLT™7000 Tape System | |
|---|---|
| Model Numbers | TH6AA-YF |
| PHYSICAL SPECIFICATIONS | |
| Height | |
| Width/td> | |
| Depth | |
| Weight | 2.9kg (6lb, 7oz) |
| Shipping Weight | 3.9kg, (8lb, 8oz) |
| STORAGE CAPACITY | |
| DLTtape IV (extended 1780 foot tape) | |
| DLTtape IIIx (extended 1780 foot tape) | 15.0 GB Native Storage User Data |
| DLTtape III standard 1167 foot tape) | |
| PERFORMANCE DATA | |
| Transer Rate | 5.2 MB/second |
| User Narive Transer Rate | 6.8 MB/second |
| Raw Native Transfer Rate | Up to 10 MB/second |
| Compressed Error Rates | |
| Tracks | 208; 52 quads |
| Linear Bit Density | 85,937 bpi per track |
| READ/WRITE Tape Speed | 160 inches/second |
| Rewind Tape Speed | 175 inches/second |
| Linear Search Tape Speed | 175 inches/second |
| Average Rewind Time | 60 seconds |
| Maximum Rewind Time | 120 seconds |
| Average Access Time (from BOT) | 60 seconds |
| Maximum Access Time (from BOT) | 120 seconds if the tape directory on the tape is valid. If the tape must be read from BOT to EOT, maximum access time is 132 seconds |
| Load to BOT (typical) | 37 seconds - previously written (slightly longer if using a blank tape |
| Load to BOT (max time using V80 firmware or greater) | 5.5 minutes with blank tape tha falls calibration (time includes calibration retires) |
| Unload from BOT | 17 seconds |
| Nominal Tape Tension | |
Click here to view the manufacturer's item description/brochure
Weight: 7.5 lb
Warranty: 1 Year DiscTech
Condition
Refurbished
Warranty
1 Year DiscTech Warranty








