Seagate Barracuda ATA II ST330630A IDE Hard Drive

Seagate Barracuda ATA II ST330630A IDE Hard Drive
Capacity: | 30GB |
Speed: | 7.2K RPM |
Interface Types: | IDE ATA 3.5in |
Form Factor: | 3.5" LFF Hard Drive |
Electrical Interface: | EIDE Ultra ATA66 66MBps |
Description
Seagate Barracuda ATA II ST330630A 20GB 7.2K Ultra ATA / 66 IDE Hard Drive - Refurbished
Seagate Barracuda ATA II ST330630A 20GB 7.2K Ultra ATA / 66 IDE Hard Drive - Refurbished
Compatibility:
This drive is compatible with any computer having an IDE/PATA controller.
Specifications
ST330630A
Barracuda ATA II
FORMATTED CAPACITY (GB) __________________30.606
ACTUATOR TYPE ____________________________VOICE COIL
CYLINDERS __PHYSICAL______________________
HEADS ______PHYSICAL______________________6
DISCS (3.5 in) ___________________________3
MEDIA TYPE _______________________________THIN FILM
HEAD TYPE ________________________________GMR
RECORDING METHOD _________________________EPRML 16/17 ZBR
INTERNAL TRANSFER RATE (Mbits/sec) _______up to 364
EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 66.6
PIO/DMA/UDMA MODE (max) __________________4/2/4
DMA SUPPORT ______________________________EISA Type B
SPINDLE SPEED (RPM) ______________________7200
AVERAGE LATENCY (mSEC) ___________________4.16
BUFFER ___________________________________2MB
Read/Write Multiple, Read Look-Ahead,
Multi-Segmented
INTERFACE ________________________________Ultra ATA/66
SECTORS PER DRIVE (LBA mode) _____________59,777,640
TPI (TRACKS PER INCH) ____________________21,368
BPI (KBITS PER INCH) _____________________up to 357,452
AVERAGE ACCESS (ms seek/read/write) ______/8.2/9.5
SINGLE TRACK SEEK (ms seek/read/write) ___/1.2/1.9
MAX FULL SEEK (ms seek/read/write) _______/17.8/19.3
MTBF (power-on hours) Office _____________500,000
SHOCK (G's, 11ms/2ms):
operating (Read/Write) __________/63
abnormal ________________________
nonoperating ____________________/300
ACOUSTICS (dBA) (typ/max) ________________34.0/43.5
POWER DISSIPATION (watts) ________________
POWER REQUIREMENTS: +12V START-UP (amps) _2.4
POWER MANAGEMENT (Watts):
ACTIVE _______________12.5
IDLE _________________8.0
STANDBY (typ/max) ____1.5/1.7
WRITE PRECOMP (cyl) ______________________N/A
REDUCED WRITE CURRENT (cyl) ______________N/A
LANDING ZONE (cyl) _______________________AUTO
IBM AT DRIVE TYPE ________________________*
Physical:
Height (inches/mm): 1.028/26.1
Width (inches/mm): 4.02/101.8
Depth (inches/mm): 5.78/147.0
Weight (lb/g): 1.2/544
* Set CMOS hard drive setup to Auto-Detect with LBA mode enabled.
MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE TO ACHIEVE FULL
CAPACITY. ALSO, CHECK TO SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR
"USER DEFINABLE" DRIVE TYPE AVAILABLE. (see below)
Possible translations:
This translation is generally acceptable, as
is, for non-DOS operating systems:
16,383 cyl, 16 heads, 63 sectors = 8,455,200,780
DOS operating systems may require a translation
that uses larger values for the CMOS head
parameter which lowers cylinders below 1024:
1023 cyl, 256 heads, 63 sectors = 8,447,459,328
Other FULL-CAPACITY solutions for DOS operating
systems include third-party drive preparation
software, system BIOS which supports LBA mode
or bios driven host adapters. Otherwise,
capacity may be limited to:
1024 cyl, 16 heads, 63 sectors = 528,482,304
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year DiscTech
Condition
Refurbished
Warranty
1 Year DiscTech Warranty