Seagate Part #/MPN: ST6000NM0145
DiscTech Item #: SGT-ST6000NM0145-BN-5Y
- Brand NewCondition Levels Explained
The product is brand new.
- Warranty:5 Year ManufacturerProduct Warranties Explained
The product has a manufacturer warranty for the time period specified.
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 6TB
Speed: 7,200RPM
Interface Types: SAS Serial Attached SCSI
Form Factor: 3.5inx1.0in LFF Hard Drive
Encryption/SED Supported
Sector Size: 4Kn
Sustained Throughput: 109 to 237
Average Seek Time: 4.16
Electrical Interface: SAS-3 Serial Attached SCSI v3 - 12.0Gbps
On-Board Cache: 256MB
Seagate Exos 7E8 ST6000NM0145 6TB 3.5-Inch LFF 12Gbps 7.2K RPM 4Kn Enterprise SAS SED Hard Drive - Brand New
Seagate Exos 7E8 ST6000NM0145 6TB / 6TB 3.5” LFF / Large Form Factor 12.0 Gb/s 7200 RPM 4Kn / 4K Native Enterprise SAS / Serial Attached SCSI SED / Self-Encrypting HDD / Hard Drive - Brand New
General Description
Seagate Exos 7E8 SAS drives provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers. The Serial Attached SCSI interface is designed to meet next-generation computing demands for performance, scalability, flexibility and high-density storage requirements.
Seagate Exos 7E8 SAS drives are random access storage devices designed to support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface characteristics of this drive. Seagate Exos 7E8 SAS drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. The SAS connectors, cables and electrical interface are compatible with Serial ATA (SATA), giving future users the choice of populating their systems with either SAS or SATA hard disk drives. This allows users to continue to leverage existing investment in SCSI while gaining a 12Gb/s serial data transfer rate.
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” based on the standards defined by the Trusted Computing Group. The head and disk assembly (HDA) is sealed at the factory. Air recirculates within the HDA through a non-replaceable filter to maintain a contamination-free HDA environment.
Standard Features
Seagate Exos 7E8 SAS drives have the following standard features:
- 128 - deep task set (queue)
- 256MB data buffer (see Section 4.4).
- 3.0 / 6.0/12.0 Gb Serial Attached SCSI (SAS) interface
- Drive Self Test (DST)
- Embedded servo design
- Firmware downloadable using the SAS interface
- Flawed logical block reallocation at format time
- Idle Read After Write (IRAW)
- Industry standard SFF 3.5-in dimensions
- Integrated dual port SAS controller supporting the SCSI protocol
- Jumperless configuration.
- No preventive maintenance or adjustments required
- Perpendicular recording technology
- Power Save
- Programmable auto write and read reallocation
- Programmable logical block reallocation scheme
- Reallocation of defects on command (Post Format)
- SAS Power Disable
- Seagate RAID Rebuild
- Self diagnostics performed when power is applied to the drive
- Support for SAS expanders and fanout adapters
- Supports up to 32 initiators
- User-selectable logical block sizes for 4KN (4096, 4160, 4192 or 4224 bytes per logical block).
- User-selectable logical block sizes for 512E (512, 520, 524 or 528 bytes per logical block).
- Vertical, horizontal, or top down mounting
Seagate Exos 7E8 SAS Self-Encrypting Drive models have the following additional features:
- 16 independent data bands
- Authenticated firmware download
- Automatic data encryption/decryption
- Controlled access
- Cryptographic erase of user data for a drive that will be repurposed or scrapped
- Drive locking
- Random number generator
Compatibility:
This drive is compatible with any server that accepts 3.5in x 1.0in (LFF) SAS drives.
Exos 7E8 | |
---|---|
Seagate Secure Model | ST6000NM0145 |
Capacity | 6TB / 6000GB |
Interface | SAS 12Gbp/s |
Sector Size | 4Kn |
Features | |
Read/write data heads | 12 Bytes |
Bytes/surface | 1,300,000 MB |
Tracks/surface | 33,900 Tracks |
Tracks/in | 375,000 TPI |
Peak bits/in | 2,226,000 BPI |
Areal density | 802 Gb/in |
Internal data rate | 2546 Mb/s |
Disk rotation speed | 7200 RPM |
Avg rotational latency | 4.16 ms |
Minimum sector interleave | 1 to 1 |
Maximum Internal data rate | 2.32 Gb/s |
Sustained transfer rate | 109 to 237 MiB/s |
Nonrecoverable read errors | 1 per 1015 bits read, max |
Load unload cycles | 600,000 cycles |
Maximum Rated Workload | <550TB/year |
Temperature | Operating |
Humidity | Maximum wet bulb temperature |
Altitude | Operating |
Weight | 1.720lb/780g |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Weight: 1.8 lb
Warranty: 5 Year Manufacturer
Brand New
The product is brand new.
5 Year Manufacturer Warranty
The product has a manufacturer warranty for the time period specified.