Seagate Part #/MPN: ST3400071FCV
DiscTech Item #: SGT-ST3400071FCV-NP-OE
Interface Types: Fibre Channel - Internal - Arbitrated Loop ASA II
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Average Seek Time: 8.5/9.5
Electrical Interface: FC-AL - 2Gbps
On-Board Cache: 8MB
Seagate NL35 Series 400GB 7.2K 2Gbps Fibre Channel Hard Drive ST3400071FCV - New Pull
NL35 Series drives combine Tunneling Magnetoresistive (TMR) heads and a Fibre Channel interface to provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers.
NL35 Series drives support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual (part number 77767496) which describes the general interface characteristics of this drive. NL35 Series drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI standard.
NL35 Series drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed.
Alternate Part Number: 9Y8107-030
This drive is compatible with any of our Fibre / Fiber Channel adapters and also with any of our Fibre / Fiber hot-swap trays.
|Number of Data Heads|
|Transfer Rate to Host|
|Number of user data cylinders|
|Bytes per track|
|Rotational Speed||7,200 RPM|
|Average Latency||4.17 ms|
|Single / Avg. track seek time (read)||0.8 ms / 8.5|
|Single / Avg. track seek time (write)||1.0 ms / 9.5|
|Dimensions (W) x (D) x (H)||101.6 mm (4 in) x 146.558 mm (5.77 in) x 25.654 mm (1.01 in)|
|Weight||726 g (1.6 lb)|
|Temp - Operating||5° to 55 °C|
|Temp - Non-Operating||-40° to 70°C|
Click here to view the manufacturer's item description/brochure
Alternate MPNs: 9Y8107-030
Weight: 1.8 lb
Warranty: 1 Year DiscTech
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty