Seagate ST3000VX000 3TB 3.5" 6Gbps 7.2K RPM SV35 Series SATA HDD

Seagate Part #/MPN: ST3000VX000

DiscTech Item #: SGT-ST3000VX000-BN-OE

$109.00

Brand New
Condition Levels Explained
The product is brand new.
Warranty:1 Year DiscTech
Product Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
Low Stock:Call for ETA
Stock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$109.00

Capacity: 3TB

Speed: 7.2K RPM

Interface Types: SATA

Form Factor: 3.5" LFF Hard Drive

Sector Size: 512 / 512e

Sustained Throughput: 210

Average Seek Time: <8.5/<9.5

Electrical Interface: SATA 600 - 6Gbps

On-Board Cache: 64MB

Seagate ST3000VX000 3TB 3.5in 6Gbps 7.2K RPM SV35 Series SATA HDD - Brand New

Seagate ST3000VX000 3000GB 3.5" 6.0 Gbps 7200 RPM SV35 Series Serial ATA Hard Disk Drive - Brand New

Alt MPN: 1CU166

SV35 Series™ - Surveillance-Optimized Storage

Key Advantages

The industry’s only surveillance-optimized hard drive platform with 3TB capacity options
A hard drive series tested and tuned for high write-cycle workloads typical in video surveillance storage systems
24×7 operational capabilities while maintaining high MTBF of 1M hours
Performance driven by a 7200-RPM base platform, with 64MB DDR2 DRAM and optimized write caching surveillance algorithms
1TB-per-disk technology takes your surveillance storage further with lower cost/GB to support HD resolutions, enhanced performance and best-in-class support.
Seagate AcuTrac™ servo technology provides accurate read-write operation even in challenging operating environments.
2A current-limited startup to support the use of embedded system power supplies
Spin control features enable power-on in standby mode or drive spin-down to conserve power and improve reliability during archival periods

Best-Fit Applications

Compatibility:

This drive is compatible with any server that accepts 3.5"x1.0" (LFF Hard Drive) SATA Drives.

SPECIFICATIONS
Model number	ST3000VX000
Interface Options	SATA Gb/s NCQ
Capacity	3TB/3000GB
PERFORMANCE
Spindle Speed (RPM)	7200
Cache, Multisegmented (MB)	64
SATA Transfer Rates Supported (Gb/s)	6.0/3.0/1.5
Seek Average, Read (ms)	<8.5
Seek Average, Write (ms)	<9.5
Average Data Rate, read/write (MB/s)	156
Max Sustained Data Rate, OD read, (MB/s)	210
CONFIGURATON/RELIABILITY
Heads/Disks	6/3
Bytes per Sector	4096
VOLTAGE
Voltage Tolerance, Including Noise (5V)	±5%
Voltage Tolerance, Including Noise (12V)	±10%/-7.5%
RELIABILITY/DATA INTEGRITY
Load/Unload Cycles	300,000
Nonrecoverable Read Errors per Bits Read, Max	1 per 10e14
MTBF (hours)	1M
Annualized Failure Rate (AFR)	<1%
Power-On Hours	8760
POWER MANAGEMENT
Startup Power (A)	2.0
Operating Mode, Typical (W)	8.0
Idle2 Average (W)	5.40
Standby Mode (W)	0.75
Sleep Mode (W)	0.75
ENVIRONMENTAL
Temperature Operating (ambient, min °C) Operating (drive case, max °C) Nonoperating (ambient, min °C) Nonoperating (ambient, max °C)	0 60 -40 70
PHYSICAL
Height (mm/in)	26.11/1.028
Width (mm/in)	101.6/4.0
Depth (mm/in)	146.99/5.787
Weight (g/lb)	626/1.38