SuperMicro MCP-220-94601-0N 3.5" Inch LFF Hard Disk Drive Tray Caddy

SUPERMICRO COMPUTER Part #/MPN: MCP-220-94601-0N

DiscTech Item #: SMI-MCP-220-94601-0N-NP-OE

$39.95
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back
$39.95

Interface Types: SAS Serial Attached SCSI, SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

SuperMicro MCP-220-94601-0N 3.5 inch Hot-swap SAS / SATA Hard Disk Drive Tray Caddy for SuperServer 6048R-E1CR60N - New Pull

The SuperMicro MCP-220-94601-0N 3.5 inch Hot-swap SAS / SATA Hard Disk Drive Tray Caddy for SuperServer 6048R-E1CR60N

Bezel Color: black.w/ burgandy latch

Compatible with the following systems (this list is not all inclusive):

6048R-E1CR60N

Compatibility:

This hard drive tray is compatible with any 3.5 inch SAS or SATA drives.

For use in Supermicro SuperServer 6048R-E1CR60N

SuperMicro MCP-220-94601-0N 3.5 inch Hot-swap SAS / SATA Hard Disk Drive Tray Caddy for SuperServer 6048R-E1CR60N supports 3.5 inch SAS or SATA hard disk drives.

This hard drive tray is compatible with any of our 3.5 inch SAS or SATA hard drives.

Bezel Color: black.w/ burgandy latch: 


Weight: 1 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty